How to deal with water seepage at the joints of the toilet sewer pipe and the floor?

Updated on Bathroom 2024-01-27
1 answers
  1. Anonymous users2024-01-23

    Many hotel toilets, bathtubs, basins, seafood pools, shower rooms, baseboards, and countertops always have annoying moldy edges, which not only affect the appearance, reduce the grade, but also affect hygiene. This is because these places are made of glass glue and the glass glue itself is suitable for organic matter, glass glue due to the moisture of the water, there will be a lot of mold and other microorganisms on the surface of the glass glue and between the crevices to grow, over time, the mold will be covered with the surface of the glass glue and turn black, at the same time, the mold will absorb more dirt and bacteria, so that the bathtub edge, the corner of the wall looks very dirty and disgusting, not only affect the appearance, but also feel unhygienic. It is also often complained by guests.

    The maintenance personnel keep replacing the glass glue edge, and the best way to eliminate your troubles is not to eradicate it! Generally, glass glue will grow mold in a humid environment for about half a year, and a small number of imported anti-mildew glue can last for one to two years, but its price is expensive. Many five-star hotel directors have a headache with this, and their usual solution is to re-glue every six months, which is not only time-consuming, costly, but also cumbersome.

    The viscosity of the glass glue is not good, resulting in its poor waterproof performance, and the water will penetrate into the wall through the gap between the glue and the wall, so that the wall will be damp, which will then cause the latex paint or wallpaper in the room to become moldy and black, and peel off. The above are caused by mildew of glass glue, if you are worried about these problems and feel helpless, then Zhicheng waterproof ceramic edge to help you solve this trouble, ceramic edge is a new type of waterproof repair material, is an upgraded product of glass glue, it can permanently solve the bathtub edge, the corner of the wall to become black and mildew. The most prominent feature of the ceramic edge is that it will never age and deteriorate, will never grow mildew and blacken, and its waterproof performance is very strong, it can be closely bonded with the wall so that the water can not penetrate, the ceramic edge contains chemical components that inhibit the growth of microorganisms, its surface is smooth and clean like the ceramic surface (the color can also be made into the uniform color of the floor) so mold, bacteria can not grow on its surface, and its surface is easy to clean, so that the bathroom looks bright and clean.

    Ceramic edge is also an environmentally friendly and non-toxic material.

Related questions
12 answers2024-01-27

1. Redo waterproofing.

Redoing waterproofing means re-laying the floor tiles, removing the original tiles and cleaning the base surface. After the cement mortar is proportioned, the ground is leveled and further waterproofed. The height of the waterproof wall is controlled at about 30cm, which is the main waterproof method. >>>More

3 answers2024-01-27

If there is a leak around the water pipe and prefabricated slab, a 2 x 3 cm groove needs to be cut around the pipe mouth. Then wash it with a brush dipped in water, and finally fill it with CF-2000 high-efficiency composite waterproofing agent, and smooth it with calendering. If the pipe elbow interface is leaking, it is necessary to customize special plugging fixtures and supporting plugging materials. >>>More

6 answers2024-01-27

Èç¹AB½ºÄ

ç¹AB½ºÄ >>>More

3 answers2024-01-27

It is divided into two aspects: water supply test and water test. >>>More

4 answers2024-01-27

There are two main reasons why the sewer pipes in the home need to be wrapped, one is to be soundproof, and the other is to make it look more beautiful. Here are a few ways to wrap the sewer pipe. >>>More