Pull the network cable from the wireless router to the living room TV to display the wrong code. Ask

If you are not afraid of affecting the appearance, then buy a long enough network cable, ask the boss to help you make a crystal head, you come back and plug it into the router, and lead it to the room and plug it into the computer to access the Internet.

No,Just set up a wireless router with a computer,Just pull the network cable to the TV,Or buy a wireless network card for TV,Just search for the router signal directly。

Of course, you can, 1, you make sure that the network cable of the network port of the bedroom has been correctly connected to the LAN port of the main route2, the subordinate router installed in the bedroom, first enter the settings, turn off the DHCP function 3, after the setting, use the network cable from the bedroom network port to the LAN port of the secondary router.

Sorry, maybe I misunderstood what I answered last time. The wiring board I am talking about refers to the kind of power switch and plug-in board used at home, and the way it is called is different in different places. In that answer, I mean that if you can pull wires from home to the balcony, use a normal router as much as possible to achieve the wireless bridging you mentioned, which is more stable. >>>More

This is used by wired bridging routers; The key is whether the secondary router (secondary router) needs to turn on the wireless function; The LAN port of the primary router is connected to the LAN port of the secondary router, and the secondary router is only used as a switch and cannot use the wireless function. If you want to use the wireless function of the secondary router, it can only be the LAN port of the main router - the WAN port of the secondary router; >>>More