Is it OK to put the bathroom floor tiles on the wall?

It is not recommended to use floor tiles on the wall, the floor tiles on the wall will fall, the wall tiles are still good with special porcelain tiles, and the kitchen wall tiles are suitable for choosing bright glazed tiles, because this kind of brick is not easy to absorb oil stains, and it is more convenient to clean. In addition, the gap between the bricks should not be too large, which will also help with future cleaning and maintenance.

The quality of ceramic tiles generally depends on three aspects: wear resistance, water absorption, and hardness.

Kitchens and bathrooms, because of the high number of uses, need to choose a relatively high wear resistance. According to the principle that kitchen tiles are afraid of oil stains and bathroom tiles are afraid of moisture, when choosing kitchen tiles, the water absorption of tiles is often considered.

Advantages of floor tiles on the wall: 1. The decorative effect is atmospheric.

2. Disadvantages of wear-resistant and solid floor tiles on the wall: 1. The cost is more expensive, mainly because the process is more complex and the labor time is longer.

2. It is not easy to clean the porcelain tile on the wall: 1. The glazed wall is easy to clean.

2. The cost is relatively cheap.

3. The construction technology is more mature and the disadvantages of porcelain tiles on the wall: 1. The style is too common and cannot meet the unique decoration needs of the owners To sum up: although the artistic sense of porcelain tiles on the wall is not strong, whether it is a robe or a horse coat from the perspective of practicality or technology, it is completely exploded on the wall of floor tiles, so if there is no special preference, it is recommended to use porcelain tiles on the wall.

The walls and floors can be made of the same bricks. Because the bathroom is small in area and has to do a slope of scattered water, it is necessary to use small bricks, 300x300 is a conventional size, and it is not recommended to use large specifications.

Yes, some hotels are now decorated with large sizes. The overall feeling is better.

The method is consistent with the laying method of floor tiles, and attention is paid to the choice of color pattern.

Generally, floor tiles are smaller than wall tiles, and they can be put on it, depending on whether you look good or not.

There is nothing that is not to be done, but wall tiles need to be easy to scrub and floor tiles need to be non-slip. That said, the performance requirements are different, and it's best not to mix them.

Floor tiles and wall tiles have different water absorption rates Indoor tiles are divided into wall tiles and floor tiles according to the location of paving. Strictly speaking, wall tiles belong to ceramic products, floor tiles are usually porcelain products, their physical characteristics are different, the two are very different from the selection of clay ingredients to the firing process, the water absorption rate of wall tiles is about 10%, which is several times higher than the floor tiles with a water absorption rate of only 1%. The floor of the bathroom and kitchen should be paved with floor tiles with low water absorption, because the floor will often be washed with a lot of water, so that the tiles can not be affected by water vapor and do not absorb stains.

The wall tile is glazed ceramic, the moisture content is relatively high, and its back is generally rough, which is also conducive to the adhesive to stick the wall tile on the wall. Floor tiles are not easy to stick firmly on the wall, and wall tiles will absorb too much water on the ground and become difficult to clean, so it can be seen that wall and floor tiles cannot be mixed.