If the bathroom water pipe at home is not used, what can be used to block it?

If the bathroom water pipes are never used again, the best thing to do is to fill them with water. In this way, there will be no future troubles and no backwater.

The bathroom water pipe at home is not used, what can be blocked, the water pipe should be said to be the water pipe, if the water pipe is not used, it is okay to care about him, if the sewer pipe is fine, it is okay not to use it for a long time.

Just buy a plug that fits your pipe diameter at the plumbing equipment store, and wrap some raw material tape before using it.

If you don't use the bathroom water pipe at home, you can seal it with a water pipe sealing plug, and the hardware store sells this special sealing product, which is very cheap.

Buying a water pipe sealing plug requires knowing the caliber of the water pipe. Pay attention to the size of the pipe, it is best to measure the diameter with a measuring tape. If there is a difference of about 3 mm in diameter, you can use the closest size sealing plug.

Use the hacksaw blade to slowly saw the faucet inside and take it out ......Wrap more raw tape with a plug!! It's not safe to plug it up with other blockages, and it's over when the water pressure increases!

I guess it's broken before I think of blocking it, I also have the same experience, Taobao has a sale, use a broken wire extractor to take out the broken head, you can also install a faucet, and turn it off if you don't use it.

Change the joint, there is a special water pipe plug, and it is OK to find a plumber outside.

Use a flat-headed driver to remove the broken thread and replace it with a plug

Please have a plumber and electrician, and will not need to go out, cut off.

Then use the plug and plug it for reference.