-
Anonymous users2024-01-24When the spotlight is installed, it needs to be opened in the ceiling first, and then the spotlight is stuck inside, only the mask will be exposed to the outside, and the thickness of the mask is generally 3 mm or thinner, so it will not protrude a lot.
Probably the reason is that the load is too low. The wire diameter is too thin. The voltage is too low, and the wiring of the terminal post is not strong enough.
The spotlight beam is concentrated, which is generally used for local (such as video wall, sofa wall, etc.), and the downlight is generally used for larger area lighting.
Hello, I hope my answer is helpful to you: the LED lights on the integrated ceiling are generally bad, the probability of the bulb being bad is very small, after you take it down, you will find a rectangular square shape in the middle of the line at both ends I don't know what it's called, it should be similar to ballast, that thing is easy to break, the light is not lit 90% of the reason is it, take it down, take that thing to buy, come back and replace it, OK! Hope to adopt Thank you.
This light is not bai, it is LED, and you can change the tube to du. Install the aluminum buckle zhi >>>More
General, but it is recommended that you use it, of course, reserve it before the carpentry work. On the ceiling, the wires do not need to be buried in the wall, but they need to be threaded. Hope it works for you.