-
Anonymous users2024-01-23This light is not bai, it is LED, and you can change the tube to du. Install the aluminum buckle zhi
The principle of the board is to use the dao triangle open shape of the special keel to card the gusset, you belong to the blade from the seam of the gusset next to it, in the light of the bottom of the use of force to take a piece of the gusset down, the lamp is generally placed on the lighting module, look at the card card, the card can be moved to the place where you take the gusset, you can take the broken lamp, it should be four feet like a needle, you can take it off, you can take it off, After getting this bad one, going to the hardware store is better than buying one and replacing it. Don't worry about breaking the gusset, it's aluminum, it's not easy to break, just replace it and stick the gusset back. Do-it-yourself for ten bucks.
-
Anonymous users2024-01-22Hello, I hope my answer is helpful to you: the LED lights on the integrated ceiling are generally bad, the probability of the bulb being bad is very small, and you will find a rectangular square shape in the middle of the line at both ends after you take it down.
I don't know what it's called.
It should be similar to ballast, that thing is easy to break.
It is 90% the reason why the lights do not turn on.
Take it down.
Take that thing and buy it.
It's OK to come back and change it in! ~
-
Anonymous users2024-01-21Hello bai
The reason why the daoLED lights above the integrated ceiling are generally bad is that the probability of the bulb being bad is very small, and after you take it down, you will find a rectangular square shape in the middle of the two ends with a line.
I don't know what it's called.
It should be similar to ballast, that thing is easy to break.
It is 90% the reason why the lights do not turn on.
Take it down.
Take that thing and buy it.
It's OK to come back and change it in! ~
-
Anonymous users2024-01-20This lamp does not copy
It's LED, just change the tube. The principle of installing the aluminum gusset is to use triangles.
The open keel clamps the gusset up, you use the blade to insert it from the seam of the gusset next to it, and use a little force to take a piece of the gusset down under the gentle stay, the lamp is generally placed on the lighting module, look at the clip card, take the clip and move it to the place where you take the gusset, you can take off the broken lamp, it should be four feet like a needle, you can take it off if you pull it out, and you can take it off when you get this bad one to the hardware store than to buy one and come back to replace it. Don't worry about breaking the gusset, it's aluminum, it's not easy to break, just replace it and stick the gusset back. Do-it-yourself for ten bucks.
Hello, I hope my answer is helpful to you: the LED lights on the integrated ceiling are generally bad, the probability of the bulb being bad is very small, after you take it down, you will find a rectangular square shape in the middle of the line at both ends I don't know what it's called, it should be similar to ballast, that thing is easy to break, the light is not lit 90% of the reason is it, take it down, take that thing to buy, come back and replace it, OK! Hope to adopt Thank you.
Most of the time the drive is broken, turn off the power, buckle it down, just change the drive, and the two wires don't need to be connected directly to the neutral line.
The lamp was turned on with a thin object like a blade.
After repair, it can be buckled directly on the triangular keel. >>>More
LED lights are generally DC driven, you can find a DC power supply (if you can't use a mobile phone charger) directly connect to the positive and negative poles of the light (skip the "dedicated power supply"), if the light is on (may be lower than the normal brightness) it proves to be a "dedicated power supply" problem. Pay attention to the safe use of electricity during operation. I hope it will be useful to the landlord, and I hope to adopt!
Use a professional suction cup to suck off the panel of the lighting module, and change the lamp tube! But you have to find a professional to do it! >>>More