-
The moisture contained in the tiles has not completely evaporated! Because the walls and floors of the bathroom are waterproofed, moisture cannot be dissipated through the walls and floors, and it will be relatively slow to evaporate only by relying on the surface of the tiles. It's okay.
In the summer, this phenomenon occurs when bathing is more frequent.
-
Explain that there may be a possibility of water leakage, you go online to see the knowledge of waterproof materials in this area, if you are sure that it is a leak on the wall, then you can.
Choose a repair agent to repair, and your problem will be solved in no time, and now there is a waterproofing material suitable for ceramic tiles.
Called: Nano ceramic clay is sold on Taobao, you can learn about it according to your needs.
-
No matter what kind of brick, water absorption is natural, but when the density of the green body is too loose, it is not only a problem of water absorption, but a problem of seepage cement. That is, the sewage of the cement will penetrate into the surface. Water trails are generated on the edge of the tile!
Good luck.
-
This phenomenon is normal and there is no need to worry. In the spring, the air is humid, the restrooms are relatively cramped, and the air flow is slow, resulting in water stains.
-
It's very simple, because it's a tile, and it can't get damp, and it can only slowly seep through the cracks on both sides.
It is not recommended that you stick tiles in winter, if the temperature is low and freeze, your wall tiles will easily fall, and the tile selection has good flatness and a better color.
Advantages of ground pressure walls:
Generally speaking, the ground pressure wall is the wall tiles from the bottom to the top, so that the tiles are not easy to produce hollowing, and the overall appearance will be more beautiful. >>>More
You can use floor tiles on the wall, or you can use glazed tiles; The hardness of floor tiles is slightly higher than that of glazed tiles, and their cost is slightly higher.
This shows that the quality of the tiles is not good and the density is relatively small. Because the closer to the ground is, the wetter it is, the loose tiles will absorb water and then darken in color. I asked the designers of B&Q before, and they said that you should pay attention to the density when choosing tiles.
Faucets or angle valves are installed with decorative rings to cover up.