-
This is a common installation issue. It's better to find a better installer. There could be the following reasons:
1.Whether there is a hair ring, toilet drain and sewer connector. 2.
The ground is uneven, and the water is not connected to the pipe. There are generally two types of drains: 30CM and 40CM. Check if it's straight to the sewer pipe.
3.It is not sealed.
May you live with peace of mind soon.
-
You must go to the building materials store to buy a special waterproof glue, ask the boss to know, do not need waterproof next time or perineal water.
-
Cream for waterproofing roofing.
I estimate your problem.
1. There is a problem with the toilet, there are always defective toilets, you may win the lottery 2, and the floor tiles are uneven.
3. Did you install it by yourself three times on the problem of workers' craftsmanship?
-
The toilet bowl is in contact with the floor tiles, and the remedy is to seal it along the toilet all sides with glass glue.
In the past, the contact between the toilet and the toilet drain was not scientific, but now there is a sealing ring under the toilet, so there will be no water seepage.
-
You still dismantle it to see if it is a toilet problem, and sometimes there will be defects when the finished toilet is demolded.
I have encountered a TOTO toilet bowl with more than 8,000 bad flushing results, because there are defects when demolding.
There are several causes of water seepage: embedded water pipes or geothermal pipes; Basin faucet caused. Determine the cause first, and then deal with it separately.
The glass glue will dry in two days, and there is no need to blow a hair dryer.
Find a plugging master to help you fix it, because you need to move the toilet to find out the cause of the leak before you can treat the symptoms. Even after knowing the cause of the leak, you don't have the tools and materials to repair it yourself.
The toilet bowl has a screw, and I tighten it.
Reprocess the toilet seals or glue the glass directly under the toilet.