The pit distance of the toilet is only 270 mm, what should I do if I want to install a toilet?

Updated on Toilet 2024-07-25
10 answers
  1. Anonymous users2024-01-24

    If you want to decorate the toilet, you must test the accurate dataIf the pit distance is only 270 mm, the toilet can be installed normally, and if you are not at ease, you can choose to use a shifter.

    First of all, let's talk about the normal installation of the toilet In fact, if you want to install a toilet, the normal pit spacing is 300 mm, but some products can be adjusted, and the smallest pit spacing is exactly 270 mm, so this can be installed directly, this is best to find a professional master to help you see first, confirm that there is no problem and then install. If the sealing effect of the toilet bowl you buy is good, you can directly ask the master to chisel a groove on the ground, and then use cement and mortar to mix and plug here, and finally do a good job of waterproofing on the ground, which is more safe.

    Then the bottom of the toilet should be pasted with fireproof mud, and the toilet bowl should be covered with glass glue, which can play a sealing role to avoid water coming out later. Or use another method, directly remove 3 to 5 cm of the floor tiles under the toilet and the sewage pipe, and then make this place waterproof to install the toilet, but it needs to be operated by an experienced master to be reliable. In addition to these two methods areIf you use a shifter, you must find someone who specializes in installing it.

    Otherwise, if the installation is not good, it is easy to cause the upper and lower interfaces to be connected unsmooth, and it will also leave certain hidden dangers, if you accidentally fall into something in the future, it will directly block the toilet and sewage pipe, and it is very troublesome to clean up. MoreoverIf you install a shifter, be sure to choose the right distance Because the longer the shifter, the longer the distance to drain the water, so the installation area should be controlled within 10 centimeters.

  2. Anonymous users2024-01-23

    Pick the right distance, go and install a shift, and you should be able to install the toilet.

  3. Anonymous users2024-01-22

    You have to ask a professional master to measure and design to install the correct toilet.

  4. Anonymous users2024-01-21

    You need to measure the data, and then process the toilet according to the data.

  5. Anonymous users2024-01-20

    I think it's a bit difficult to install this yourself, so why don't you ask someone to install it.

  6. Anonymous users2024-01-19

    I think this distance can still be installed, but the specific design still needs to consult the designer.

  7. Anonymous users2024-01-18

    This should be measured by a professional to see how to deal with it in practice.

  8. Anonymous users2024-01-17

    If you want to install a toilet, you can consult a professional to provide door-to-door service, determine a reasonable location, and then install it.

  9. Anonymous users2024-01-16

    The pit distance of the toilet is only 270 mm, what should I do if I want to install a toilet?

    Dear, hello, I am happy to serve you, about the toilet pit distance is only 270 mm, if you want to install the toilet, how should you deal with it? , for your answer for two methods: one is to do the pipe displacement, the ruler Qin increased to 300, but the flushing effect is not good after this shift, you can use the smart toilet without a water tank, the punch is large, do not worry about blockage, at present, our products can be installed without a water tank of 285mm.

    At present, our products support 250 300 350 400 These four pit spacing suggestions: 1, see if you can move 2cm, cheap toilet is likely. 2. There is a toilet with a pit distance of 280, replace the toilet.

    There is a fissure reed seed sitting flange. You can move the toilet position back and forth.

  10. Anonymous users2024-01-15

    The pit distance of the toilet is only 270 mm, what should I do if I want to install a toilet?

    The pit distance of the toilet is only 270 mm, what should I do if I want to install the toilet and be cautious? Hello dear, glad you asked: two ways:

    One is to do pipe displacement, increase to 300, but the flushing effect is not good after such displacement, you can use a smart toilet without a water tank, the punch is large, don't worry about blocking the code is not plugged, at present, our products can be installed without a water tank of 285mm. The second is that the ceramic itself is changed to the pit filial piety distance, and at present, our products support 250 300 350 400 these four pit spacing.

Related questions
1 answers2024-07-25

As long as the drain of the toilet can be set in the drain hole, it can be used, and the drain hole of the general toilet is 50, plus the wall thickness is about the same, and it can be aligned during installation.

1 answers2024-07-25

Toilet sewer pipes with 60 mm are absolutely not okay...

Toilet sewer pipes must be 110 (100) pipes to facilitate circulation. If 60 mm is used, it is inconvenient to pass the circulation channel, because the toilet needs to be used by people to relieve stool, and if the stool is dry, induration, paper towels, etc., it will condense and not be easily washed away by water. In other words, the 60 mm pipe space is too small, not easy to circulate, and easy to block. >>>More

2 answers2024-07-25

If the pit spacing is greater than the maximum standard pit spacing of the toilet, the following methods can be taken to solve it >>>More

1 answers2024-07-25

If it is a pit distance of 170mm, you can only choose a squatting toilet. >>>More