Foton security door unlocking

1.The method of tin foil unlocking seems to be very old, because it has been used for a long time. Of course, many thieves will also use this method to carry out lockpicking and theft.

2.The unlocking time of hitting the lock cylinder is about 30 seconds. Insert one end of a master key into the B-grade cylinder and hit the other end of the key with a hammer; In the process of beating, try to twist the master key, and then hit it with a hammer a few 6 times, at which time the general lock cylinder will be opened.

3.Insert the deadbolt and unlock the lock time is very fast, about 6 seconds. All you need is a rectangular plastic card, insert it into the gap between the door and the door frame, and slide down to the deadbolt to open the door smoothly.

4.Chewing gum unlockingChew gum soft stuffed into the keyhole, and use a tool to push the softened gum into the keyhole. Because some old-fashioned lock cylinder pins are of average quality or short length, they are "squeezed open" by chewing gum, and then inserted into the lock cylinder with a tool to open the lock.

5.Crochet unlockingCrochet needle is inserted into the lock hole, and according to the principle of key unlocking, the lock is unlocked by adjusting the position of the lock cylinder pin.

6.Cat's eye unlocking pries the "cat's eye" on the security door, and then uses tools such as "three-section sticks" to reach through the "cat's eye" into the room, and apply pressure to the built-in doorknob or lock of the security door outside the door, and then try to open the door.

7.The small screwdriver and paper clip first use a small screwdriver to press the direction of unlocking, button the lock hole, and then use a paper clip or thin wire to make a small hook, repeatedly pull the bullet in the lock cylinder, until the small screwdriver can be moved, and then carry out the operation of unlocking.