The lights in my kitchen and toilet are not on! Water leakage

First of all, check the air opening (leakage-proof electric switch) at home, that is, the circuit switch there, to see if the bathroom and kitchen are a circuit, if it is one, turn on the light first, and then push the air open, to see if it trips, if it trips, it is a circuit problem, on the contrary, it is a problem with the lamp. If it is a problem with lamps and lanterns, then, you go to the lamp market to buy a lamp, go home and prepare tools (pliers, tape, screwdrivers), first turn off the main switch of your home, confirm that it is turned off (your TV lights are not lit), you can replace the lamps, after removing the previous lamps and lanterns, there are two wires on the roof of the shed, you connect these two wires with the two wires of the lamps (after stripping the wires, and then wiring), after connecting, wrap the exposed metal wires with adhesive tape (be sure to wrap them), It is best to make the two wires not next to each other, and then install the lamp, after the finish, turn on the light, push the air open, and the task is completed.

Are there obvious signs of water leakage? The lifespan of the lights in these two places is relatively short, especially the two-dimensional energy-saving lamps with ballasts, and it is recommended that you replace them with ordinary energy-saving lamps. If it's not a problem with the lamp, it's best to check the line first, your leakage protection won't fall, and the line should be fine.

If you have a new house for three years, you should find someone to solve the problem as soon as possible, and drag it out as soon as possible, and there are other ways to solve it if you don't solve it upstairs or the developer! Provide free professional technical consultation for concrete waterproof leakage repair.

If there is a leak in the roof, there will be a lot of moisture, and the rectifier of the lamp will reduce the life of the lamp in a humid environment.

Is your home a new building, according to the design, the new building circuit has leakage protection, if it is because of water leakage, your switch can not be pushed. It's still up to see if you can find the person who decorated at that time, and find the next node again.

See if the circuit breaker jumps If it doesn't, it's unlikely to be a wiring problem Go to the switch and the lamp holder, and find the problem on the lamp.

The electricity is leaking, the lamp is burned, find an electrician to take a look, the current lamp is basically electronic, and it will break when it is damp.