-
Anonymous users2024-01-24If it is not combustible is caused by the low pressure you said later, you can solve this problem, I don't know what material you use the pipe, if it is an iron pipe, it is estimated that there is rust and slag blocked, if it is a plastic pipe, it is estimated that it is stuck when it is bonded, it is recommended to find a plumber to check the pipe.
Do not rule out the possibility of water pressure (can be verified in two places without the output of the water heater, whether the water pressure in the two places is consistent), but the distance between the bathroom and the kitchen is not likely to cause water pressure problems (the two are very close), more attention should be paid to the indoor problems of the bathroom, if the bathroom is not ventilated (there is an exhaust outlet and there is no exhaust fan or there is an exhaust fan and the bathroom is too tight to get air), the oxygen supply is insufficient, carbon monoxide reflux and gas combustion is not comprehensive, not only affect the combustion heating, It can also lead to poisoning with water heaters.
You remove the shower head and just drain the water to try it. If it can be ignited after unloading, it is caused by too much scale on the sprinkler head.
If it is a gas water heater (socket-powered), check that the gas line leading to the kitchen is unblocked and that there are no leaks in the line throughout. >>>More
The water pressure of the shower is too low, and the water heater cannot be ignited, so the sprinkler head of the shower is cleaned.
Machine reason: If your water heater in your home is an old-fashioned water vapor linkage valve starter device. It is that the rubber diaphragm (black rubber round disc-shaped object) in the mixing valve of the water heater has aged or damaged for a long time, making it difficult or even unusable for the machine to start at low water pressure. >>>More