What materials are better for kitchen and bathroom ceilings?

As the kitchen is usually with water and water vapor, the ceiling must be made of water-resistant and moisture-proof materials, so it is recommended that you use PVC gusset better; And the bathroom is also inseparable from water, so choose aluminum gusset.

Kitchen and bathroom ceilings are generally suspended with aluminum gusset ceilings.

Choose moisture-resistant, corrosion-resistant materials, preferably assembleable for easy access to kitchens and bathrooms, or directly use PVC materials to directly suspend the ceiling.

It is recommended to use aluminum gusset board: the kitchen is more susceptible to oil pollution due to frequent cooking, so you must be cautious when choosing ceiling materials, and you must choose oil-resistant materials, such as aluminum gusset board, plastic steel plate, PVC board and waterproof gypsum board.

The advantage of aluminum buckle plate or plastic steel plate is that it is easy to disassemble and assemble, and although the gypsum board seal is beautiful, if there is a problem, it is inconvenient to repair. It doesn't matter if you don't use waterproof gypsum board in the kitchen, because there is not much moisture in the kitchen, and the kitchen basically has windows, so it won't be too wet.

Aluminum gusset is a three-layer composite plate with plastic as the core layer and aluminum plate on the outside, which can apply decorative or protective coating on the surface. The aluminum gusset used in the kitchen and bathroom mainly considers the surface treatment technology, which is currently commonly used: electrostatic spraying, baking paint, roller coating, pearlescent roller coating, and lamination.

Among them, electrostatic spraying, baking paint service life is short, easy to appear color difference, roller coating, pearlescent roller coating plate service life in the middle, no color difference, the coated board can be divided into ordinary film and imported film, ordinary film and roller coating plate compared with the service life is lower, and the service life of the imported film can basically reach 20 years without color.

At present, the commonly used raw materials are: aluminum-magnesium alloy, aluminum-manganese alloy, aluminum alloy. Among them, the biggest advantage of aluminum-magnesium alloy is that it has good oxidation resistance, and because of the content of manganese, it has a certain strength and stiffness, which is the most ideal material for making ceilings.

Aluminum thickness - the thickness can be reached.

What material is better to use for the kitchen and bathroom?

The ceiling construction of the kitchen and bathroom has always been a difficult point in home decoration. The dampness is relatively large during the sleep. There are fumes and peculiar smells, and at the same time, the busyness of life makes people unable to clean up the debris in the kitchen and bathroom in time.

Therefore, the use of appropriate materials and reasonable construction methods in the decoration construction may reduce a lot of trouble for your future life.

In the actual construction process, waterproof coatings, PVC sheets and aluminum-composite panels are the materials commonly used in kitchen and bathroom ceilings. In the construction, the waterproof coating has the characteristics of convenient construction, relatively low cost and diverse colors, but the decorative effect is the same, after long-term use. There is a phenomenon of partial peeling and fading, and the performance is also relatively unstable, so it is rarely used in more sophisticated home decoration.

PVC board is also used more in home decoration now, the construction is convenient and fast, the color is also very rich, the main feature is good waterproof performance, easy to clean, long-term use does not need to be replaced, but in the more sophisticated indoor, because it is an extrusion material. The traces of industrialized mechanical production are more obvious, lack of personalization, less change, and the indoor environment sometimes has a sense of incongruity, the grade is low, and it is a transitional product in the ceiling profile.

In recent years, the materials that have become popular are aluminum-plastic sheets and other materials, and the outer layer is formed by a single stamping of lightweight aluminum plates, and then the plastic surface layer is sprayed with a special process, which is colorful and rich, and does not fade after long-term use, and has excellent waterproof performance. The construction is simple and not deformed, but relatively speaking, the cost is also relatively high-end in high-end places such as apartments, villas and hotels. With marble, granite and other natural stone wall combined with the standard, not only can bring out the respective decorative characteristics and can be harmonious and unified, complement each other for the kitchen and bathroom ceiling construction, the selection of appropriate materials is only the first step, the construction process is more important is the setting of the exhaust and humidity system, so that the indoor humid air can be discharged in time, on the one hand, it can protect the ceiling material and its structure, but also can effectively protect the kitchen and bathroom in the increasing electricity equipment.