How to install a bathroom mirror long light tube

It is similar to the installation of general lamp pipes.

1. The purchased lamp should have the same specifications as the old lamp, the wattage is not important, the key is the same length, otherwise it cannot be installed.

2. The general step is to remove the lampshade first, one side of the lamp stand is movable, and then hold the lamp tube and push it a little hard to that side, and you can remove the old lamp.

3. Install one side of the activity on time, put the two plug-in posts into the slot, and push hard to leave a gap on the other side. Just put the other post into the slot.

4. First try whether it is powered on and whether the ballast is out of order. Finally, just install the lampshade.

If you don't see the picture, you can't force it, the general step is to remove the lampshade first, and then hold the lamp tube at one end to the other side (there is a lamp holder that is active) and push it off a little harder.

First of all, I can't be sure from your description what your lamps and lanterns look like, but generally one end is fixed, even if it is not fixed, one end is loose, the other end is not needed to loosen, in order to be durable and durable, it is best to always change it at one end in the future, if there is no loose place to take the time to go down the lamp shop, find the same lamps and lanterns as yours and ask the boss how to change, if the product itself has limitations (disposable), then change it. The old glue on the dresser should be cleaned with a scraper, and then go to the furniture store to buy a bottle of glue and apply the film yourself.