Bathroom wall tiles are better to be fully tiled or semi porcelain

Bathroom floor available.

To choose all-porcelain, the source wall can choose semi-porcelain.

The floor of the bathroom is paved with full ceramic tiles, because the full porcelain porcelain bricks have the characteristics of high hardness, not easy to break, high anti-fouling performance, low water absorption and good flatness. Some people say that the anti-slip performance of all-ceramic tiles is not good, but in fact, there are special all-ceramic anti-skid tiles for toilets on the market, which can effectively solve the problem of anti-slip.

The water resistance of the semi-ceramic tile is poor and easy to penetrate, so it is not suitable for laying the bathroom floor, but the semi-porcelain is easy to go on the wall, and can be used to pave the wall of the bathroom.

The bathroom floor tiles are copied from all porcelain. The difference between full tile and half tile is now rarely said to be full tile and half tile, the difference between the two is the water absorption, full tile refers to the water absorption rate is less than the tile, also called vitrified tile. The water absorption of half tiles is greater than .

The water absorption rate of all porcelain is very low, and it can be paved without soaking in water, but the semi-porcelain also has to be soaked in water for construction, as if the red brick is not burned through, the cut surface of the brick is not the same, and the price is not the same. All ceramic tiles are vitrified tiles, all porcelain, non-absorbent, strong anti-fouling, specification *600. All-porcelain ceramic tiles have high hardness, not easy to break, high anti-fouling performance, low water absorption and good flatness.

Semi-porcelain tiles have low hardness, easy to break, easy to penetrate, and poor gloss.

Everyone knows that buying a house is a costly and brain-consuming thing, and decoration is really a money-consuming, time-consuming, and laborious thing. And decoration is a test for most people, because they don't understand, and it is easy to suffer if they don't choose the right decoration company. In order to save money, some people use some poor quality materials, etc., or encounter some irresponsible decorators.

It didn't take long for a good new home to have all kinds of problems, and it was really a wrong step. For example, the purchase of decoration materials is a headache, is the tile all porcelain or half porcelain better? After listening to the insider's introduction, I regret that my home was wrong.

For the decoration of Xiaobai, I don't know what is the difference between all-porcelain and semi-porcelain tiles, but there are all-porcelain and semi-porcelain. In fact, the difference between full ceramic tile and half tile is mainly in water absorption. The water absorption rate is generally less than that of ceramic tiles, more than 10% of which is clay bricks, and between the two is semi-porcelain.

Therefore, when purchasing, you only need to look at the water absorption rate of the tiles to distinguish whether it is all-porcelain or semi-porcelain. When buying tiles, it is best to find a professional to accompany you, otherwise it is easy to be fooled by the salesperson.

So, is it better to have tiles that are all-porcelain or semi-porcelain? According to the master's analysis, the hardness of the all-porcelain tile will be relatively high, not easy to break, and the all-porcelain tile has high anti-fouling performance, low water absorption and good flatness. In contrast, the hardness of semi-porcelain tiles is relatively low, easy to break, and easy to penetrate, and the gloss is not good.

In conclusion, insiders suggest that it is best to buy all-ceramic tiles for decoration, which are of good quality and guaranteed. The water absorption rate of all-porcelain is very low, and it can be paved without soaking in water, which is very convenient.

The difference between the all-porcelain or semi-made floor tiles in the bathroom lies in the different water absorption rates of the two, the water absorption rate of the whole tile is less than, and the water absorption rate of the ceramic tile is greater than. In addition, the whole ceramic tile is vitrified brick, its anti-fouling ability is particularly strong, and the hardness is particularly high, not easy to break the problem, the variety is particularly good, and the gloss is also very strong. The water absorption rate of semi-ceramic tiles is good, but it can only be constructed after soaking in water.

Decoration Da Cui explained the problem of using all-porcelain or semi-porcelain for wall tiles, and hoped to help you in decoration.

It's okay, see what you like.

Hello, the bathroom is good with all porcelain. The water absorption rate of all porcelain is very low, and it can be paved without soaking in water, but the semi-porcelain also has to be soaked in water for construction, as if the red brick is not burned through, the cut surface of the brick is not the same, and the price is not the same. All ceramic tiles are vitrified tiles, all porcelain, non-absorbent, strong anti-fouling, specification *600.

All-porcelain ceramic tiles have high hardness, not easy to break, high anti-fouling performance, low water absorption and good flatness. Semi-porcelain tiles have low hardness, easy to break, easy to penetrate, and poor gloss.