How to deal with toilet Park brand blockage

Updated on Toilet 2024-07-31
2 answers
  1. Anonymous users2024-01-24

    Suction on the toilet will make it well.

  2. Anonymous users2024-01-23

    1. You can find a half-inch wide bamboo strip and put it into the toilet to dredge it to solve the problem, but be careful not to break the bamboo strip in the toilet. 2. Many times the toilet flushes more and flushes it yourself, especially if it is soluble or breakable items such as tea and paper towels. If it is greasy, then flush a basin of 100 °C boiling water to melt, it is best to buy an iron ring through the pipe, first pass the pipe, and then try the above scheme.

    3. Go to the grocery store and buy a simple toilet. I hope my answer can help you.

Related questions
3 answers2024-07-31

Go to his store and buy a new one.

3 answers2024-07-31

You can use a softer plastic pipe, which is flushed with water, sealed at both ends, and really connected, such a pipe has a certain hardness, and can be bent, it is very easy to use, you try it, I wish you success.

19 answers2024-07-31

It can usually be cleaned with an acidic substance, because toilet limescale can usually be dissolved in acid, and white vinegar or toilet cleaner can be used.

5 answers2024-07-31

Where is the interface between the toilet base and the floor? If this is the case, it is the excuse that the toilet bowl and the drain are not properly sealed. Or if the time is too long and has been aged, remove the toilet, clean up the drain around it, change the sealing ring, install the toilet, and put white glass glue on the joint between the toilet base and the ground

10 answers2024-07-31

It is estimated that the toilet is clogged, first dredge it yourself, if it is not easy to use, find a professional to dredge the toilet, if it is because of a long time, the toilet is aging, then it is better to replace it with a new one!!