How to install the toilet, how to align the drain of the toilet with the mouth of the sewer

First, place the sealing ring on the floor drain mouth and compact, then align the toilet drain with the sealing ring, and finally, use sealant to seal the contact between the toilet bowl and the ground.

Now the toilet has two holes, because the distance between the drain and the wall of the house is not uniform, that is, the pit distance of the proverbial place, the pit spacing of the two holes should be 30CM, and the other is 40CM. >>>More

As for the drain of the toilet, use a 100 or 10 mm diameter PVC pipe to connect to the toilet, and then go straight to the septic tank. And then this interface is made with glass glue.

After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test. Regardless of these basically experienced masters, they know that the bathroom installation master who is looking for Master Wan does not need to consider these problems at all, and the more experienced master will basically do. >>>More

If it is connected in series with the indoor toilet drain, it needs to be blocked - for fear of returning odors, other situations are arbitrary!