-
Anonymous users2024-01-24If it is normal, then see whether the toilet inlet is blocked by foreign objects, and it will take tens of seconds to minutes for the toilet to be full of water under normal circumstances.
-
Anonymous users2024-01-23Three possibilities:
First, the water pressure suddenly decreases, it may be that the pipeline suddenly has someone using water, and second, there are foreign objects in the inlet pipeline blocking the water outflow.
Third, the opening and closing device of the float of the water tank is abnormal and cannot be opened in place.
-
Anonymous users2024-01-221. Remove the hose connected to the water tank completely, and then the flush toilet and the inlet pipe are completely separated. Check whether the inlet valve is normal, if the water outlet of the inlet valve is not urgent (you can see it by pressing and holding the outlet hole with your finger).
2. Check the hose again. It's best to check to see if the pipes are clear.
3. Connect the hose to the water inlet pipe and recheck whether it is normal from the water inlet pipe to the hose outlet.
4. Connect the hose to the water inlet interface of the toilet bowl and check it.
Solve any problem in any link.
-
Anonymous users2024-01-21The tank inlet may be plugged.
First, remove the hose connected to the water tank completely, and then the flush toilet and the water inlet pipe are completely separated. Check whether the inlet valve is normal, if the water outlet of the inlet valve is not urgent (you can see it by pressing and holding the outlet hole with your finger). >>>More
There are several reasons why the toilet does not get water: >>>More
When flushing, use a basin and add a basin of water at the same time should be fast, if there is an effect, open the lid of the water tank and raise the water level in the tank
The flush toilet is not really pumping, in fact, the tap water pipe is connected to the toilet tank through a float valve, and when the toilet tank is full, the float will resist the valve to automatically close the tap water. >>>More
The method of removing the water inlet switch of the toilet is very simple. The first thing is to turn off the water inlet switch under the toilet tank, then put the water in the toilet tank clean, then remove the snakeskin hose at the water inlet of the water tank, and unscrew the cap from the bottom of the water inlet pipe of the water tank, and you can take the water inlet pipe and accessories out of the water tank. The tool for disassembly can be disassembled with a wrench.