The toilet valve turns on the water meter, and when the tank is full, the valve does not turn, but i

After reading your questions and other people's answers, let's not talk about the problems there, just because the way you checked the toilet for leakage was wrong, not the way you checked it. The toilet leak is not leaky, and it can not be fully detected by turning off the angle valve of the toilet. If the inlet valve is broken, the water tank will leak out from the pipe on the upper side of the outlet valve, and of course it will not leak out if you close the angle valve, but if you don't close it, it will leak overnight.

The best way is to open the toilet tank lid and see if there is any water flowing out after the tank is full, and you will know if it is clear after standing there for 5 minutes. The amount of water in 2 square meters is so large, but there is a problem with the toilet here, and it is caused by the inability to turn off the water.

The water meter has been walking, nine times out of ten is that the squatting toilet is broken, the appearance is not visible, the water directly enters the water from the water tank, you can turn off the water valve to try, the way is to reinstall or replace it all.

The leak is not visible, so you can put a small float in the tank to see if there is any slight movement.

There is also the phenomenon that it can be used for hours when the water inflow is fast.

The water inlet is fast, because the float ball rises quickly, so quickly pull up the miscellaneous valve and stop the water ingress. The problem with the water outlet is that the button pulls up the position of the water outlet, if the water flow is small and the pressure is small, there will be a small water outlet, and if the water flow is fast, it will quickly crush and stop the water outflow.

It is also possible that there is a leak in the place where the outlet appliance comes into contact with the water tank, so close the inlet valve and the water in the tank will run dry.

If the water inlet is broken, if there is no problem with the toilet outlet, and the water outlet appliance is not tightly closed, the water will just fill the tank and flow out.

Only the water intake, can not see the water, it must be the water tank flushing part of the leakage, if it is a new house, most of them are not good, reinstall it.

Your situation should be that the outlet valve is sometimes leaking and sometimes not leaking depending on the water intake.

Since the toilet is not leaking, why don't you think it's the toilet? From your description, you know that the main valve at home used to be closed and the water meter rotated and stopped, but I don't know what is happening now? If the meter is rotating, you should carefully check each valve, close them one by one, and if the water meter stops when closing a certain valve, check the valve carefully.

Mind you, sometimes pipes and fittings can leak.

1. Whether there is cold water and hot water inlet in your home, check the water inlet crosstalk.

2. In the early stage of cold water inlet, it may be called the first circuit, and a check valve or check valve is added.

Hello, has the problem of your house been solved? My family is like this for three months I owe 799 water bills and finally find the reason The triangle valve of the toilet As long as it is opened, the water meter will rotate The bucket is full and it is also turning Then close the valve The toilet tank is also full There is no leakage I wonder where is this water leak? It's been a day, in the state of the triangle valve closed, the toilet tank has been full, indicating that the water tank is not leaking, the water meter is not turning, but as soon as the triangle valve is opened, the water meter will rotate, but the toilet tank has no anomaly, there is no sound of flowers, the water meter is rotation, I also solve, if the landlord finds the reason, please inform!

The toilet float valve is broken, fix it.

Does the valve of the toilet bowl still rotate when it is only opened?