-
Anonymous users2024-01-24The toilet is one of the most important sanitary ware in the bathroom, and due to its frequent use, it is inevitable that there will be some minor problems. If you want to repair it, you need to open the toilet tank first, so how to open the toilet tank? Let's take a look at the relevant knowledge right away.
1. The structure of most toilet tanks is relatively simple, there is a joint in the upper part of the water tank, and then use both hands to hold it, and the water tank will be opened;
2. There is also a kind of water tank cover that is equipped with its own bayonet, first press a button for pumping, and then pry out another button with a knife, you can see that there is a groove on the adjacent button, and pull out the remaining buttons.
3. Finally, use a knife to screw out the plastic screws below, and the water tank can be moved up.
The failure of the water tank is caused by the poor quality of the toilet itself, so we try to choose a better product when buying a toilet tank.
-
Anonymous users2024-01-23Generally, it is enough to lift the lid directly, but there are some special shapes.
The flushing principle of toilets on the market is basically two categories: straight flush type and siphon type. The siphon type is divided into vortex siphon and jet siphon. There is a complete pipe in the siphon toilet with an inverted "S" in the shape of a side-to-side shape, and the slope of the pool wall is gentle, and the noise problem has been improved; It has the characteristics of strong sewage discharge capacity and large clean surface, so the vast majority of toilets, especially the conjoined ones, are siphon type.
-
Anonymous users2024-01-22Just pick up that lid and you're good to go.
-
Anonymous users2024-01-21Look to see if there are seals on both sides, if there is a seal, tear it directly, open the lid, and you can open the toilet tank.
-
Anonymous users2024-01-20The lid on the top can be lifted directly.
-
Anonymous users2024-01-191. The structure of most toilet tanks is relatively simple, there is a joint on the upper part of the water tank, and then clean it with both hands, and the water tank will be opened;
2. There is also a kind of water tank cover that is equipped with its own bayonet, first press a button for pumping, and then pry out another button with a knife, you can see that there is a groove on the adjacent button, and pull out the remaining buttons.
3. Finally, use a knife to screw out the plastic screws below, and the water tank can be moved up.
The failure of the water tank is caused by the poor quality of the components of the toilet itself, so when we buy the toilet tank, we try to choose a better product Qiaokong. Answer: Kuandan.
There are two buttons above the toilet lid, press any of the buttons, and then use the flat mouth to change the cone or a knife, and the process should not be too strong, otherwise the toilet lid will be easily damaged; After taking out the two buttons, use a knife or trail to unscrew out the fixing screws of the tank cover; Once the screws are removed, the tank lid can be opened. >>>More
Generally, just uncover it directly. There is no mechanism. >>>More
There are no steps to open the ordinary toilet tank, you only need to lift the lid on the top of the tank directly.
1. Press either of the two buttons for pumping water first, and pry the other one out with a knife or a flat mouth cone (there is a shallow groove on the adjacent side of the two buttons); Then, you can pull both out. Then, use a knife or flat cone to screw out one of the plastic screws underneath, and then you can move the ceramic toilet lid up. >>>More
Clamp the outer edge of the button on the water tank lid with a tool and rotate it counterclockwise, the lid will be taken off, and the water tank lid will be opened, try it.