-
Anonymous users2024-01-24If the socket is less and there is zero electricity, then the power supply will not be turned on, so it is recommended to find another cable to connect it, or replace the socket with a new one.
-
Anonymous users2024-01-23If you don't have it, you can run another one to pick up the ......
The reasonable height is as follows: the socket of the electric water heater is 1800-2000mm, and the position of the electric water heater should be considered. >>>More
When using water in cold weather, if the water mist generated affects the socket, I personally think that it is most appropriate to install it above the ceiling, so as to avoid the water mist from being in contact with the socket and causing electric shock. If the room is equipped with ventilation, it is recommended to install it underneath for easy disassembly or maintenance.
It is estimated that the capacity of the wire used in your bathroom socket line is not enough, or the power of your electric water heater is too large and exceeds the maximum load of the line.
Be as high as you can. The socket can be behind the bottle, which is not easy to touch, and because there is a bottle gall block to cover some water. >>>More
There is no problem with the square of the socket line, the minimum safe current is 15 amps, and the power is about 3500 watts, mainly depending on how big the plug of your water heater is, the plug is 10 ampe, then the socket is also equipped with 10 amps, the plug is 16 amps, and your socket is also equipped with 16 amps. >>>More