Bathroom leakage, how to repair

Updated on Bathroom 2024-07-10
3 answers
  1. Anonymous users2024-01-24

    It is recommended that you use the item-by-item elimination method to find the cause of the water leakage, and the item-by-item elimination method is: close the tap water and hot water pipe valves, do not use the bathroom drainage, do not take a bath, and wait for the downstairs to not leak, you open and use it one by one, and determine what the leakage is. Recommended Procedure:

    Turn on tap water first, then hot water, then use sanitary ware again to test drainage, and finally use a shower to take a shower, this process requires 10-20 days of observation for each item.

    If the underground pipe is leaking, you need to smash the ground to repair the pipeline; If it's not a leak in the pipe, it's a leak in the bath on the ground, you can go to the place that sells waterproofing agents and buy some repair fluid, and it won't leak after treatment.

  2. Anonymous users2024-01-23

    1.If the roof of your bathroom is leaking, please find an upstairs neighbor to deal with it; 2. If your house seeps water downstairs, there is only one way, that is, smash the bathroom floor, re-waterproof treatment, and then check whether the water pipe street is seeping.

    Bathroom floor waterproofing method: after the ground is smashed off, use polypropylene (preferably 300 grams up) and cement slurry wet adhesive treatment, the wall side back 250mm high on it, in the wet adhesive method, polypropylene and cement slurry can not have bubbles, to combine dense. The side seams of the upper part of the wall should be pressed with Js paint and non-woven fabric, and the width of the upper and lower parts should be 15 to 20 cm.

    THE ROOT OF THE DRAINAGE PIPE ON THE GROUND SHOULD ALSO BE STRENGTHENED, AND THE RETURN CAN BE ABOUT 200MM, WHICH CAN BE DONE WITH POLYPROPYLENE AND CEMENT SLURRY. For the root of the drain pipe is really not at ease, you can brush the polyurethane (slightly toxic, no obstacle after concealment) waterproof material outside the reinforcing layer. The above-mentioned materials can be purchased in the building materials market, or you can ask someone to deal with it, and supervise it yourself according to the method I said.

    I wish you an early solution to the practical problem.

  3. Anonymous users2024-01-22

    Find the leakage point first, whether it is a pipe building or a waterproof leak on the ground, and the building materials store has a leak plugging treasure spray spray sprayed on the ground and around the pipe.

Related questions
14 answers2024-07-10

First of all, find out the location and cause of water leakage, and plug the leakage according to the cause and location of specific water leakage. >>>More

9 answers2024-07-10

Of course, you can use waterproof cement to wipe all the joints on the ground, maybe it will be good!

1 answers2024-07-10

This had to be redone waterproofing below the ground waterproofing was not done well. >>>More

4 answers2024-07-10

Generally, when the rough house is inspected, it is necessary to do a closed water test to test the waterproof performance, so your estimate is caused by the problems caused by the decoration construction, such as the slope of the floor tiles is not enough, resulting in water overflowing through the door stone, or the waterproof layer damage caused by the installation and construction. >>>More

1 answers2024-07-10

The bathroom space is small, the structure is complex, and there are many pipe fittings, so it is easier to leak.