-
Anonymous users2024-01-24The internal ball valve line is broken, and you can't go back, just lift the line inside the water tank by hand.
-
Anonymous users2024-01-23The switch did not pop up, it was faulty; Or the internal float is stuck.
-
Anonymous users2024-01-22The flush switch you pressed didn't pop up; It could also be that the internal float is not floating.
-
Anonymous users2024-01-21The flush is broken, it's time to find someone to fix it.
Usually the float is broken and will not float. Pull the float a few times hard, and it's usually fine.
The float connecting rod is broken and needs to be replaced with a new installation, and it is ready to use.
Of course, the float is too high and has to move down, because the water pressure is too large; >>>More
The float is too high, you can open the tank to see if the float is pushed to the end, generally the float to the water level with buoyancy to the water outlet to resist, if the screws that fix the float are loose, it will generally continue to leak. There is also a possibility that the rubber stopper is broken, and if the stopper is broken, it will usually have to be replaced.
This is because the plug has not been reset after you flushed the water last time, you can press the flush button again and hear a popping sound in the tank, that is, the plug is reset, and the water will not leak again, please accept.