The toilet water keeps putting what s going on

Of course, the float is too high and has to move down, because the water pressure is too large;

Or it is the water inlet, there is a foreign body, resulting in the water can not be sealed early, there is flowing water, for a long time, the toilet water level is high, so that the continuous leakage. Method: Reverse Lu shouts at this time the needle rotates out of the toilet inlet control lever and cleans foreign objects. Screw it on clockwise.

It's the toilet that is broken, usually the self-closing device is not reset. Please press the flush button a few more times to give it a try, and it may be restored. If it cannot be restored, the toilet angle valve can be closed before it is repaired to prevent wasting water.

There is a problem with the inlet valve: it will cause the water to keep coming in, and the water level will rise to full, but it will continue to flow from the overflow pipe on the drain valve to the toilet; If the seal on the drain valve is deformed or blocked by foreign objects, the water level will not rise and the water will slowly seep into the toilet.

Selection of toilets:

To the market to choose a toilet can start from five steps: look, touch, check, compare, and try. First of all, looking at the whole, the various qualification certificates of well-known brands are relatively complete.

1 Determine the flushing method and installation size of the toilet 2 Siamese and split toiletsOne-piece toilets: There is no connecting part on the outside, so it is easy to clean and easy to install, but the price is more expensive. Split Toilet:

It is composed of two parts, the water tank and the base, which may cause dirt at the connection and should not be cleaned, but it is cheaper. 3. The style and color of the supporting products must match, 4. Select and judge water-saving products.

Of course, the float is too high and has to move down, because the water pressure is too high;

Or it is the water inlet, there is a foreign body, resulting in the water can not be sealed, there is running water, and after a long time, the toilet water level is high, so that it continues to leak. MethodRotate the water inlet control lever out of the toilet counterclockwise to clean the foreign matter. Screw it on clockwise.