There are beams in the living room, how to design the ceiling

If the beam is in the center of the living room, it will not only make people feel oppressive and uncomfortable, but its position is just around the important space, so there is a beam ceiling in the middle of the living room, how to decorate it?

First, the shape of the partition space.

In the living room, the beam across the living room is generally at the junction of the living room and the dining room, this kind of beam is easier to handle, the living room and the dining room are separated from the ceiling modeling, and the beam can be used to do the division, one side is at a level height with the beam, and the other side is more than 10 centimeters lower than the beam surface, and the stepped division space is made; If the beam is on the edge, it can be made into a hollow shape, leaving the light groove and installing a light tape to cover it to hide or divert attention.

Of course, there are self-built houses, and the beam with a large span will definitely be in the middle of the living room, in this case, you can do a ceiling parallel to the beam, so that you can't see where the beam is without taking a closer look, and you can also use this beam to divide the living room into two halls, one for the living room, one for the dining room, or a leisure world.

Second, false beam modeling.

The false beam shape is more suitable for the situation that the beam is in the middle of the space, and the beam height of this type of house can be used to hang the ceiling if the floor height is sufficient, but usually the floor height of the house type will not be so high, so it is necessary to find a way to deal with the beautification of the beam, and in terms of beautifying the beam, the false beam shape is usually very good.

3. Be bold and "leave blank".

The so-called bold blank space is not to do special treatment of the beam, such a bold treatment, requires a very careful design. If the beam is at the boundary of the space, the top beam and the wall below are painted with latex paint of different colors to make the space appear more layered. For the space with a large floor height, the beam that is not directly treated is actually quite generous.

Divide the living room and dining room into two partitions, at least distinguish them in the style and shape of the ceiling, so that it is much more convenient to deal with the beams, that is, the living room ceiling has an elevation (the height of the bottom of the visible beam, slightly pressed down the point, and the non-beam part is changed to a local shape); The dining room has a separate ceiling, and the elevation is appropriately raised.

You can only choose the way of suspended ceiling! See if the picture is to your liking.

It is recommended to mark the specific position of the beam, otherwise everyone will not be able to help you.