Where to place the double control light switch at the head of the bed in the bedroom

Updated on Bedside 2024-07-02
6 answers
  1. Anonymous users2024-01-24

    From a convenient point of view, the bedroom dual control switch can be installed above the bedside table, about 80CM from the ground. That is, it is 30CM above the bedside table, and the bedside table is 50 cm. In this way, it is easier for people to turn on and turn off the lights after going to bed.

    The double control switch of the entrance door is installed at a height of about one meter from the ground.

  2. Anonymous users2024-01-23

    THE DOUBLE CONTROL SWITCH IN THE BEDROOM CAN BE INSTALLED ABOVE THE BEDSIDE TABLE, ABOUT 80CM FROM THE GROUND.

    The principle is to turn the lights on and off while lying in bed.

    The installation height of the double control switch of the entrance door is about one meter from the ground.

  3. Anonymous users2024-01-22

    The 30cm position above the bedside table is within easy reach.

  4. Anonymous users2024-01-21

    From the point of view of convenience, of course, it is more convenient to put it near the bedside table.

    In this way, it is easier for people to turn on and turn off the lights after going to bed.

  5. Anonymous users2024-01-20

    To put it simply, it's a convenient position.

    It's usually on either side of the bed, a little higher than the bedside table, and you imagine lying on the bed where you can reach out and press it.

  6. Anonymous users2024-01-19

    The bedside table is 55-60 cm.

Related questions
The light in my master bedroom has removed the dual control switch, and the light is still flashing,
2 answers2024-07-02

There are 2 situations, one is the quality of the lamp, now it is all Led, and some of the same street lamps are powered off. >>>More

If you want to make a double control at the head of the bed, you need to lead a few wires to the swi
2 answers2024-07-02

The duplex switch has three holes and three wires.

From the door of the bedroom to the head of the bed, you need to connect a few wires to install a do
4 answers2024-07-02

There must be 3 wires to achieve the double control switch light at the bedroom door and the head of the bed, specifically refer to this wiring diagram, K1K2 is the double switch at the door of the bedroom and the head of the bed.

The bedroom door is opened with dual control to control the bedroom light, and the bedside is opened
1 answers2024-07-02

It is better to have a diagram of the wiring holes on the back of the two switches, so that you can explain it in detail. And it is necessary to know where the power supply is, whether there are two switches or there is a power supply next to it (zero, live wire).

Where is the best place to put a humidifier? Is it placed at the head of the bed or under the air co
2 answers2024-07-02

Of course, it is better to put it under the air conditioner, and the moist air can be brought to all parts of the room by destroying the circulation of the air conditioner, and it is easy to cause excessive local moisture at the head of the bed, which is not good for people.