What should I pay attention to when choosing American furniture?

Hello. When choosing American furniture, you should pay attention to the following points:

1. Degumming: It usually appears at the glue between the surface of the furniture and the inner plate, which will affect the firm strength of the furniture. Identification method: When you tap the degumming place with the back of your finger, it will make an abnormal sound, such as the surface decoration veneer degumming, you can see that there are bubbling or cracking, and it will bounce when pressed by hand.

2. Loose or broken tenon joints: usually appear in the camphor joints, and in serious cases, the furniture will lose its function or cause other damages. Identification method: Shake the joint parts by hand, especially the wall panel connection of the furniture tripod and drawer, to see if there is any loosening.

3. Bending and deformation: usually appears on the surface of the desk, dining table, large wardrobe façade, and the surface of the leather bucket. When the desktop is deformed, the stability of the items placed is poor, and the bending of the façade is easy to make the items in the cabinet damp.

methods of identification; When viewed horizontally from one end to the other, if there is an arc-shaped convex or concave between the two ends, the table top is curved.

4. Decay wood: usually appears in the interior of furniture, such as drawer wall panels and other parts. Decaying wood can affect the service life and strength structure of furniture.

Identification method: The general texture is soft and brittle, and if you dig it with your fingers, it will fall off piece by piece. The color of the wood is black, blue or unusually white spots.

For example, the quality inspection of pure American brand grape edge furniture in the United States strictly follows the relevant US regulations and quality difference standards, and strictly abides by the provisions of the "American Consumer Product Safety Act" and its amendments, so as to ensure the safety, stability and durability of home printing manuscript products, and the quality is guaranteed.

Different furniture has different surface materials. For example, the legs of the Heaitage dining table and chair cabinet are required to be made of hard wood, which is relatively strong and can bear weight, while the internal materials can be made of other materials; The thickness of the large wardrobe legs is required, if it is too thick, it will look clumsy, and it is easy to bend and deform if it is thin; The cabinets in the kitchen and bathroom should not be made of fiberboard, but should be made of plywood, because fiberboard will expand and be damaged when exposed to water; Dining tables should be washable. It was found that the wood had lead worm eyes and foam, indicating that the drying was not thorough.

After checking the surface, you should also open the cabinet door and drawer door to see if the inner material is rotten. After opening the cabinet door, smell it with your nose, if the nose is flushed, dazzling, and tearful, it means that the formaldehyde content in the adhesive is too high, which will be harmful to the human body.

2. The moisture content of wood does not exceed 12

The moisture content of furniture shall not exceed 12%, and the moisture content is high, and the wood is easy to warp and deform. When the general consumer buys, there is no testing instrument, you can take the method of hand touching, touch the bottom of the furniture or the place that is not painted inside, if you feel damp, then the moisture content is at least more than 50%, and you can't use it at all. Another way is to sprinkle a little water on the unpainted part of the wood, if it is slow or not wet, it means that the moisture content is high.

Just look at the right one yourself and pay attention to the quality.

I'm just a porter.

1. Determine whether the furniture is all solid wood? Or indicate where is solid wood?

2. What kind of tree is solid wood made of? This has a direct impact on price and quality.

3. Inquire and judge whether the wood carving material is solid wood or resin.

4. Observe the quality of wood, whether there is obvious wood knot and black heart?

5. Test the strength of the board surface and the stability of the foot.

6. Observe whether the drawer or door frame is tilted? Is the tenon eye position crooked or the eye hole too large?

7. Put your hand on the surface of the furniture and carefully check whether the polished surface is smooth? Are there cracks or bubbles?

8. Observe whether the paint surface is mixed with oil or open? The oil mixed type cannot see the wood grain, and the material is easy to adulterate.

9. Inquire and observe the material of other accessories.

10. Inquire about the moisture content and origin of the wood.

One is the shape of the furniture. Modeling is an important symbol to measure the beauty of furniture, it shows the creativity and expressiveness of the designer, whether the current furniture or the past furniture, whether it looks good or not, mainly design. Second, the process is good.

It's not just good looking, it must also be durable. The so-called good process is the quality of processing, a piece of furniture set woodworking, carving, inlay, polishing, decoration a complete set of things, each process must be excellence, meticulous, if which process can not be done will affect the whole. We want to buy furniture, and how we choose is very important.

Of course, there are many other scientific methods, but the easiest way for you to teach you is to see, listen, and knock. Look: to see how the shape is, to see whether the lines are round, smooth, to see what it carves, whether it is flowers, birds, fish and insects, carved things are not both charm, not only to have shape, but also to have charm, only the existence of both furniture is the best furniture, to see whether the seams on the surface are combined better.

Touch, sometimes touch this side, is not flat. When touching, you can't follow the lines, but against the end of the lines. The third is that the material should be true.

When buying furniture, in addition to looking at the shape and processing technology, you should also look at the material.