Is the surface of pine furniture easy to care for?

Pine furniture maintenance and cleaning taboo:

Do not wash pine furniture with soapy water or water.

Because soap cannot effectively remove the dust accumulated on the surface of pine furniture, nor can it remove the fine sand particles before polishing, it will make pine furniture dull, and if water penetrates into the wood, it will also cause mold or local deformation of the wood, shortening the service life.

Do not use coarse cloth or old clothes as rags.

When wiping pine furniture, it is best to use towels, cotton cloth, cotton fabrics or flannel cloth. Coarse cloth or cloth with threads, snaps, stitches, buttons can scratch pine furniture, so it must be avoided.

Do not wipe pine furniture with a dry cloth.

Since dust is composed of fibers, sand, etc., many consumers are accustomed to wiping the surface of pine furniture with a dry cloth, resulting in these fine particles leaving fine scratches on the surface of pine furniture.

Avoid improper use of wax products.

Some people apply wax products directly to pine furniture in order to make it look shiny, or use pine furniture wax oil inappropriately, which will make pine furniture look foggy and spotted. In order to avoid the loss of the original luster of pine furniture due to improper cleaning and maintenance, it is best to use a cloth stained with cleaning and care spray wax to wipe it to avoid scratches and maintain the original brightness of pine furniture.

Pine furniture cleaning method:

Rinsing method: add 20 grams of bleaching powder, add kilograms of warm water to dissolve, and repeatedly brush the parts of pine wood with pine oil with this solution until it turns white slightly, and then rinse with water.

Shoveling method: For the part where the pine oil exudes more, you can use a shovel to remove the part, and then smooth it with mud. Regardless of the treatment method, it is necessary to scrub with ethanol (alcohol) or apply a layer of shellac varnish to prevent the pine oil from being removed from the pine wood and affecting the paint film.

Dissolution method: dissolve with 25% acetone aqueous solution, and can also be brushed with a mixture of 20% acetone aqueous solution and a small amount of alkali.

Alkali washing method: use 8% 10% sodium carbonate (edible alkali surface) aqueous solution, or 4% 6% caustic soda solution, clean the parts of pine wood with pine oil, make pine oil saponification (oil and alkali interact and become soap and glycerin), and then use a sponge or brush dipped in hot water (40 50) to scrub and rinse.