What should I do if the bathroom is too wet?

The bathroom is the easiest place to gather moisture, so it is also the focus of the home moisture prevention.

Solution: 1. The exhaust fan is the basic equipment of the bathroom, and the exhaust fan is opened frequently, in addition to discharging the moisture in time, it can also discharge the filth of the bathroom, which is conducive to physical health. If you do not have an exhaust fan, you should close the door when you leave the bathroom after taking a shower and allow the moisture to condense before entering to dry or blow dry with an electric fan.

There is an integral shower room, so be sure to close the door when showering.

2. If the bathroom is not divided into dry and wet areas, then please try to install a shower curtain to prevent the bath water from splashing (special attention must be paid to the moisture-proof and dehumidification problem of the socket in the bathroom and toilet, once the power supply leaks due to moisture, the consequences are unimaginable).

3. The walls of the bathroom seem dry, but in fact, there is invisible water vapor. Therefore, the toilet should not be built under the ladder of the building, and plastic wall materials should not be used for dismantling; The tile joints that are attached to the wall and the ground should be coated with white cement, if the brick joints produce black spots, it means that the moisture is too heavy and moldy. Disinfect with disinfectant water and dry the walls with a hair dryer.

The bathroom is one of the places where we use it most frequently, and it is also one of the places where we use the most water, so the bathroom is often extremely humid, which will have a certain impact on the service life of sanitary ware over the years.

1. Waterway transformation.

If you need to change the waterway pipeline, not only the pipeline needs to be horizontal and vertical, and it needs to be laid firmly, but the root of the pipe must be cleaned and painted 2-3 times before being painted with waterproof materials. In addition, the floor drain should be set at the lowest place on the floor of the toilet to facilitate the discharge of running water.

2. Waterproof engineering.

Waterproofing in the bathroom can greatly alleviate the problem of moisture return, especially in the bathroom with poor ventilation conditions, it should be waterproof when decorating. In addition to being done twice, the waterproof height of the bathroom must also exceed 1800mm.

3. Dry and wet partitions.

Wet and dry partitioning is possible as space permits. In addition to concentrating moisture to keep other places dry and extending the life of each sanitary ware material, the dry and wet partitions can also improve safety and prevent people from slipping and falling due to water splashing on the floor.

4. The top surface is moisture-proof.

Compared with the non-waterproof gypsum ceiling, it is more recommended to use moisture-proof and stain-resistant aluminum gusset ceiling, which is more convenient to clean.

5. Hard loading materials and sanitary ware.

The various materials used in the restroom also need to be taken into account. Try to use tiles throughout the space. When choosing floor tiles, you need to try to choose a good quality, high water absorption rate of non-slip, more suitable for the wall, but also more conducive to the use of the wet environment of the bathroom.

6. Bathroom cabinet.

The bathroom cabinet is most susceptible to the humid environment is the cabinet board, so in the selection of the board, more consideration should be given to the moisture-proof performance, such as solid wood board. The solid wood board has good waterproof performance after being treated with multiple waterproof processes and baking paint process. The solid wood cabinet with qualified workmanship is moisture-proof and mildew-proof, and it is not easy to deform.

In addition, considering that there is often a lot of stagnant water on the bathroom floor, if the bathroom cabinet is made of wooden cabinet legs, it is easy to get damp, if the cabinet is suspended and installed, or the bottom of the cabinet is supported by metal as the outrigger material, it can not only prevent moisture, but also be more stable.

After decoration, do a good job of daily maintenance, after washing and bathing, you need to pay attention to open windows for ventilation. If there is any residual water saving on the ground, it should also be cleaned to avoid long-term water accumulation. If the ventilation conditions of the bathroom itself are not good enough, you need to open the ventilation fan often to ventilate.

Workaround:

1. The exhaust fan is the basic equipment of the bathroom, and the exhaust fan can be turned on frequently, in addition to discharging the moisture in time, it can also discharge the filth of the bathroom, which is conducive to physical health. If you do not have an exhaust fan, you should close the door when you leave the bathroom after taking a shower and allow the moisture to condense before entering to dry or blow dry with an electric fan. There is an integral shower room, so be sure to close the door when showering.

2. If the bathroom is not divided into dry and wet areas, then please try to install a shower curtain to prevent the bath water from splashing (special attention must be paid to the moisture-proof and dehumidification of the bathroom socket, once the power supply leaks due to moisture, the consequences are unimaginable).

3. The walls of the bathroom seem dry, but in fact, there is invisible water vapor. Therefore, toilets should not be built under stairs and plastic wall coverings should not be used; The tile joints that are attached to the wall and the ground should be coated with white cement, if the brick joints produce black spots, it means that the moisture is too heavy and moldy. Disinfect with disinfectant water and dry the walls with a hair dryer.

For sealed restrooms, only exhaust fans can be installed! and dehumidifiers! Not much! It works!