What should I do if the protective layer on the furniture can t be removed after a long time

Updated on furniture 2024-07-06
3 answers
  1. Anonymous users2024-01-24

    Wet the cloth with nitro thinner, it is best to bring a leather glove and wipe it off on it, some can be wiped off directly, and some can be removed after wiping.

  2. Anonymous users2024-01-23

    You can only put it if you can't remove it, otherwise if it is hard, it may cause damage to the paint surface of the furniture, and it is also ugly.

  3. Anonymous users2024-01-22

    The most commonly used is to use a hair dryer (to blow hair) while blowing and tearing, not too hot wind, to tear slowly, if it doesn't work, you can try the following methods:

    1. Wipe it with a paper towel dipped in some alcohol (it is best to use industrial alcohol, or make do with medical treatment), and then rub it a few times to be clean.

    2. Use acetone. Same method as above. The amount is small and thorough, and the best thing is that it removes these residual gums very quickly and easily, which is better than sprinkling sperm. Both of these are solvents and are the most effective of all methods.

    3. Use nail polish remover. The usage is the same as alcohol acetone. The effect is also very good. Nail polish remover does not require quality, good or average, as long as it can wash off the nail polish.

    4. Use hand cream. Tear off the printed product on the surface first, then squeeze some hand cream on it, and slowly rub it with your thumb, and rub it for a while to rub off all the sticky residues. Just slow down.

    Hand cream is an oily substance, and its properties are incompatible with glue. This is the use of this property for glue removal. These 3 and 4 articles are introduced in a column of CCTV 1.

    The material is easy to find and convenient, and it can remove residual glue.

    5. Use banana water. It is an industrial agent used to remove paint, and it is easy to buy. The method is the same as alcohol acetone.

    6. This method must be useful, buy "Tian Na Shui" to wipe, I am a furniture factory, generally we remove dirt and paint are wiped with Tian Na Shui, but I don't know what material you are made of furniture, I hope to help you, but the Tian Na water is a little stinky, and it takes about half an hour to volatilize the smell after wiping.

Related questions
3 answers2024-07-06

You can put some dish soap or something and brush it well, it will be better.

2 answers2024-07-06

Is it the film of kraft paper? It's a film for panel furniture. Just blow it with a hair dryer, tear it with your hands, and you're done.

1 answers2024-07-06

Nabu Jiao Tianna water (banana water or thinner) can remove the aging of self-adhesive!

1 answers2024-07-06

It doesn't matter that the general ceiling is used with PVC or aluminum gusset will not be broken, if you don't worry, you open the bath door to ventilate the water droplets will naturally be gone, I hope to help you, thank you for adopting!

2 answers2024-07-06

Although white furniture is beautiful, it is easy to turn yellow after a long time Cleaning and maintenance is more troublesome Wipe it with common furniture cleaners on the market, and it can also be kept fresh for a long time, and it is white and bright. >>>More