-
Anonymous users2024-01-241.The joints of the gypsum board should be filled with greasy ash first, and then the bandage paper should be pasted before the paint!
2.Wood screw cap point anti-rust paint!
3.post-processing; Buy a box of "Seam King" and everything will be in it for you (bandages, greasy ash, glue). They are sold at building materials stores.
We all know that there are more and more ceiling materials now, but gypsum board is still used for a long time, and it is especially suitable for use in some places to do modeling, such as living rooms or bedrooms. Gypsum board ceiling is still very ivory in all aspects, for example, your living room should be made into a multi-layer style, you can choose gypsum board to do when you choose, but you can choose it to the bathroom or kitchen is not allowed, because gypsum board is not resistant to water, we all know that the bathroom and kitchen are a relatively humid place, so it is not suitable for this material. After the gypsum board is done, a very critical step is to deal with the paint process well, especially like some, and the seams should be pasted with cloth before the bottom paint can be done.
Are you asking whether a light steel keel ceiling or a wooden keel ceiling is better? Personally, I think that it is better to improve the home or the wooden keel, and the light steel keel that is mandatory in public places.
It's still good that acrylic is better. Acrylic has a good shape, but the plate is hard and brittle, lacks toughness, and is easy to process and transport, and acrylic is often called plexiglass. The light transmittance is 92, the impact resistance is 16 times that of ordinary glass, and the weight is light, half lighter than ordinary glass. >>>More
The quality of drywall refers to the strength and flexibility. What determines the material (the amount of fiber in the gypsum material) plays a decisive role. If the quality is better, the strength is good, the toughness is not easy to break. The flatness of the ceiling is good and not easy to deform!
There is no better way, in fact, it should be cut at a positive or negative angle of 45 degrees, and then install, so that the elasticity of the gap will be smaller, and the crack resistance of the cloth will be better.