What s the matter with the toilet bowl that can t be swallowed

Updated on Toilet 2024-07-25
1 answers
  1. Anonymous users2024-01-24

    One possibility is that it is blocked, there is no way to generate negative pressure, and it cannot be sucked. There is also a possibility that the drain pipe is not sealed and leaks during installation, in which case the toilet should be smelly, and there is a possibility of overflowing from the joints between the toilet and the floor when flushing. Depending on what you're talking about, the first one is more likely.

Related questions
9 answers2024-07-25

Answer pro, hello, I am happy to answer for you, please wait a moment, immediately answer for you dear, when the toilet does not have the problem of water, we have to see if the water is off in your home or someone has turned off the water inlet valve, if this is the case, then no water must not be on the water, this you have to pay attention to the owners to see when the water comes or open the water inlet valve yourself. Of course, this rarely happens, but we can't rule it out, and we still have to check it. >>>More

7 answers2024-07-25

Inside the water tank, the button skin does not fit. I've also encountered the button of opening the lid of the water tank and pressing the lid directly, ignoring the lid. You can call someone to repair it, or you can fix it yourself since the early stage, just get the inside right, and if it's easy to loosen, strengthen it.

3 answers2024-07-25

Press the float to see if the water is in, if you don't enter, the pipeline is blocked, and if you enter, the float is stuck.

5 answers2024-07-25

There are several possibilities for the toilet not to be watered: the first possibility is that the water has been stopped and you haven't noticed it. The second possibility is that the toilet does not have water due to low water pressure, such as the floor is too high or the overall water pressure of the building is low, and the water valve in your house is too small, etc. >>>More

1 answers2024-07-25

Open the lid of the water tank and observe that there is no water on the water tank. Whether the piston can be plugged. If you can't plug it, it will leak, and the water tank is not up to the switch, so you won't get on the water. >>>More