-
Anonymous users2024-01-24Hey, it's a transformation, and the balcony should not be paved with wooden floors, it should still be floor tiles, and 800*800 is very beautiful. It's good to have a mat or rug.
The water from the window should not flow to the windowsill, but should be guided by a flow channel to the outdoor windowsill.
Central heating should not have the problem of low temperature, unless the heating is insufficient and there is air in the radiator, not circulating, after finding that it is not hot, it should be deflated in time, and adding a radiator has a certain effect.
There is no need to do balcony insulation, the real heat dissipation lies in the windows, if you want to be beautiful and space, you will seal the windows with plastic film in winter and glue them with scotch tape. It's really cold, turn on the electric heating to assist, and the heating effect of the air conditioner is limited when it is really cold.
The cause of mold on the wall is basically the reason you said, the most important thing is dampness and poor air circulation.
The third requirement is difficult to achieve, and there are many reasons for the decoration company (not to talk about it), and there are many reasons for being justified.
If the window sill leakage is not out of the warranty period, you can find them to repair and solve it.
-
Anonymous users2024-01-23Smear anti-cracking mortar on the extruded plastic board, and then paste it on the wall under the balcony window, and use the extruded plastic board, mainly because it is insulated and strong, and does not settle in case of water;
There should be a certain gap between the extruded plastic boards, and then fill them with anti-crack mortar;
Finally, seal the gypsum board or light brick, the insulation of the balcony is the best, and then the light brick is pasted;
Note: It is best to use extruded plastic board for insulation materials, not benzene board and rock wool.
-
Anonymous users2024-01-221. You can insulate the balcony, and it is best to use a two-component one. Check it on the Internet yourself, and the big manufacturers have it.
2. The condensation and mildew on the wall is caused by the cold and hot bridge, and it is not just that your home can be avoided by insulation, except that you also insulate the roof.
3. This situation has little to do with the decoration company. It is mainly related to the design of the main building.
-
Anonymous users2024-01-21The effect of internal and external insulation is still good for extruded plastic board, or polystyrene board (foam board) can be used to weigh several kilograms, commonly known as the effect of high density, if Beijing wants to find a construction team, add it
1. You need to describe in detail the location and condition of the leakage in the toilet. >>>More
It goes without saying that the internal insurance is based on the internal insurance or the external insurance, and the construction area is calculated according to the extension edge of the outsourcing, and the geothermal energy has nothing to do with the construction area.
If you are afraid of freezing the tube, you can add an insulation layer to the tube.
First of all, we must know what the source of oil smoke is, there is oil smoke because the oil reaches the smoke point, the oil reaches the smoke point because the pot is too hot, and the pot is too hot because the pot is heated unevenly. So the pot is very critical, my home Oryx non-stick pan is hand-cast in Germany, aluminum alloy pot body, fast heat conduction, uniform heating, stir-fry rarely has oil smoke, you can try.
The number of people using the toilet exceeds the actual carrying capacity of the toilet, and the solution is: increase the capacity of the facility and reduce the number of people in line; increase the density of toilets and disperse the use of toilets; Provide and use personal convenience utensils (diaper cups, plastic bags, adult diapers.