-
The location of the toilet is limited by the pipe, and it is generally not movable, if it is a new house, and it is a sunken type that has not been filled, the position can also be changed.
-
Hello, it is not recommended that you change the location of the toilet. After the change, it is easy to shine into a clogged toilet bowl when used in the future.
-
Moving within 10 cm is not a big problem, unless the toilet can be raised as a whole when moving long distances.
-
It is best not to change it, it will affect the design of some positions of the original bathroom, and it is easy to have problems.
-
It is recommended that you don't need to change it, and the designer has designed it wherever it is placed. Random changes will destroy Feng Shui.
The bathroom is generally lower than the living room, if it is the same height and there is no height difference, it is a quality problem, you can ask the developer for rectification or compensation.
The developer is very elf.,If you go to ask.,Push you left and right.。。 There are too many such problems, and if it is my words, give them an ultimatum, either to demolish the building or not to go to court.
You can use marble, but the cost will be particularly expensive, want PVC board is not corrosion-resistant at all, the life is too short, ceramic tile is the best choice, not necessarily have to pave porcelain tiles, you can choose 800 900 specifications of glazed tile cutting, now there are many ceramic tile series, like vitrified marble, diamond glazed tiles are very good.
Waterproofing manufacturing method.
1. Ground leveling before waterproof treatment of the bathroom. >>>More
2. Ground: Before laying floor tiles, be sure to do a good job of waterproofing; After the tile is laid, it is necessary to ensure that the brick surface has a drainage slope (generally about 1% is appropriate), and the slope is towards the floor drain; After laying tiles, the ground must be closed water test, and the time must be at least 24 hours; When laying floor tiles, pay attention to the joints and alignment with the wall tiles to ensure the overall sense of the entire bathroom, so as not to produce a cluttered impression visually. 3. Wall: >>>More