-
Anonymous users2024-01-24Stone use AB glue or marble glue, and glass glue is used for the edges.
Stainless steel, glass glue.
Mosaic special glue.
Glass glass glue.
-
Anonymous users2024-01-23You want to ask what the name of glass glue is.
The extrusion is gelatinous, and after drying, it can be firmly adhered to the surface of tiles, glass and metal.
-
Anonymous users2024-01-22You don't usually have a lot of water in the bathroom at home, right? If you want to do it, you can use a piece of marble, which is more convenient, and the cement underneath, silicone is not strong.
-
Anonymous users2024-01-21Make a water retaining strip out of stainless steel or marble and glue it directly to the tile with silicone.
-
Anonymous users2024-01-20The problem is not very clear, you can consider custom-made stone with glass glue.
As long as there is a reserved wiring position in the bathroom, that is, a socket, it is just an installation problem, but the electrical sales should be responsible for the installation. Also pay attention to whether the socket you want to use is connected to the cable that can carry the current of the small kitchen treasure.
If you forget to install a floor drain in the dry area of the bathroom, it is a very inconvenient thing to use 。Because the dry area of the bathroom is the place where excess water needs to be drained, a floor drain is needed. If there is no floor drain, then the dry area becomes meaningless. >>>More
It's best not to add, because the waterproofing of the bathroom is done before the overall paving, once it is bound to be destroyed, it is difficult to do it without leakage in the later stage, if it really leaks, you must be ready to compensate for the loss downstairs. >>>More
The waterproofing is not done well, and the decoration company should deal with it for you! Provide free professional technical consultation for concrete waterproof leakage repair.
Of course, it is the responsibility of the owner to leak the house that has been renovated and occupied, if the water leakage is done when the closed water test is done when the house is closed, you can find the builder or the property, at that time it is their waterproof that is not up to par, but it is possible that the person has damaged the waterproof layer during the renovation process, so it is the responsibility of the owner.