-
Anonymous users2024-01-24Are you sure it's not a leaking pipe? If you are sure, the floor tiles generally will not leak, and water seepage is also a problem of grout: one is to remove the original grout, use tools to expand the gap on the original basis, and fill the waterproof grout, must be careful in the construction, compaction.
After waiting for the grout to dry, I apply silicone waterproofing agent, and I want good quality Hanai water. Remember these points and try not to take a shower in the bathroom, and there should be no open water on the ground. After 3-5 days, it's fine.
-
Anonymous users2024-01-23There is no particularly good, long-lasting solution.
The floor tiles can only be re-inlaid after removing the floor tiles and doing a good job of waterproofing.
-
Anonymous users2024-01-22It is generally difficult to do a good job of filling the leakage without dismantling. Unless the leakage is caused by cracks in the floor slab, there is basically no good way to cure the root cause except for the waterproof leakage from the roof of the downstairs with high-pressure grouting to repair the leakage.
-
Anonymous users2024-01-21If it is a non-water pipe leakage, you can solve the problem of water leakage on the tile surface with unplaned bricks.
Yijia waterproof three musketeers do not need to plane brick tiles to solve the problem of leakage on the surface of ceramic tiles, do not affect the surface of ceramic tiles after maintenance, strong wear resistance, waterproof effect permanently, these three materials everyone will operate, the product is ready to use, no need for professionals to build.
-
Anonymous users2024-01-20It can only be filled with cement, but it is better to dismantle it, as the leakage inside will continue to seep out.
-
Anonymous users2024-01-19At present, there is no way to do waterproofing to destroy the floor tiles.
-
Anonymous users2024-01-18It's better to dismantle it, the pipe inside is broken, and it's done in vain, is it leaking?
-
Anonymous users2024-01-17I am a professional waterproofer, can I not remove the bricks, do I need help?
Bathroom leakage, we must first find out the cause of the bathroom leakage, and then take the corresponding solution. The common causes and solutions of water leaks in the restroom are as follows. >>>More
Floor drains, wall corners, pipe heels and other joints should be painted with high elasticity and flexible waterproofing, because the joints between the wall and the floor of the bathroom will be displaced and are most likely to seep water. If the bathroom has a shower room, the waterproof bucket should be ground to 180cm, and if there is a bathtub, the waterproof wall waterproof height adjacent to the bathtub should be 30cm higher than the bathtub
The reason why many people's homes will leak, most of the cases are caused by the destruction of the bathroom waterproof layer, because many owners lack the knowledge of waterproofing, do not know the structure under the tile, often think that the bathroom at home has been waterproofed, there will be no more leakage, in fact, the bathroom waterproof layer is not done well or cracked, which will cause the bathroom water to seep from the gap to the downstairs, which is the main reason for the bathroom leakage. >>>More
1. To prevent water leakage in the bathroom, it is necessary to do a good job of waterproofing. >>>More
Check what is the cause of the leakage, if the pipe is broken, change one, if the waterproof layer is not done well with the kind of efficient liquid penetration crystalline waterproof material, can penetrate into the concrete inside, but it can not be managed for a few years, if the waterproof layer is not done well during the decoration, the later maintenance is very troublesome, it is best to knock the brick and redo the waterproof to reduce the later maintenance. First find a professional to see what the reason is to solve the specific problem.