-
Anonymous users2024-01-24Pay attention to the materials used in the furniture. The surface materials of filing cabinet furniture, such as the legs of tables, chairs and cabinets, require hard wood, such as ash, oak, etc., which are relatively strong and can bear load, while other materials can be used for internal materials. It was found that the wood had insect eyes and foam, indicating that the drying was thorough, and such filing cabinet furniture could not be bought, because the insect eyes would bite bigger and bigger.
After checking the surface, you should also open the cabinet door, wardrobe, drawer door to see if the inner material is rotten, you can pinch it with your fingernails, and if you pinch it in, it means that the inner material is rotten. After opening the cabinet door, smell it with your nose, if the nose is flushed, dazzling, and tearful, it means that the formaldehyde content in the adhesive is too high, which will be harmful to the human body.
2.Pay attention to whether the structure of the office chair furniture is firm and whether the joints of the mortise and tenon are tight. Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the cement floor when selected, and a gentle fall with a crisp sound indicates that the quality is better; If the sound is hoarse and there is a noise of splitting the horn, it means that the mortise and tenon are not tightly combined and the structure is not firm.
The desk and table can be shaken by hand to see if it is stable. The sofa can sit down, shake it, if it is not active, it is not soft, there is no sound, it means that the tenon structure is more reliable, if you sit and move, it will squeak and squeak, shake it, it is a nail job, and it will not take long. Square tables, bar tables, chairs, etc. should have four triangular clips on the legs to hold them in place, and if they don't, they may fall apart over time.
When choosing, you can turn the table and chair upside down to have a look, and the cloth chair can be touched by hand.
3.Pay attention to whether the edging and edge sealing of the furniture are smooth and tight. The edge sealing is uneven, indicating that the inner material is wet, and the edge will fall off in a few days.
The edge banding should also be rounded, not straight edges. The edges sealed with wooden strips are prone to moisture or cracking. For plywood bezel-inlaid furniture, the wrap is nailed with nails, and it is necessary to pay attention to whether the nail hole is flat and whether the color of the nail hole is consistent with other places.
Usually the nail hole is sealed with putty, pay attention to whether the putty is bulging, if it is bulging, it will not work, and slowly the putty will fall out of it.
4.It is necessary to pay attention to whether the installation of hardware accessories of furniture is complete, regular and reasonable. For example, check if the door lock switch is not working; The large cabinet should be equipped with three dark twisters, and some can only be equipped with two; There are three screws, and some cut corners, only one screw, and it will fall off when used.
The polishing is particularly bad.
The experience of working in a furniture factory can be summed up in two points: getting up earlier than chickens and sleeping later than pigs. And then there's the repetition of a job day after day.
The pattern maker is the designer of each batch of model products, they are only responsible for the design, and there are operators who make the product according to the designer's design.
The sales volume will be a bit large and distinctive, and every household may have it, preferably in the city. The rest is best sold in the furniture city. It is better to sell imitation IKEA products.
Xianghe County, Hebei Province.