-
Anonymous users2024-01-24The last thing to do is not to use wire, and now it is all made of light steel keel supporting the ceiling, 600X600, called the rail beggar board.
-
Anonymous users2024-01-231. Before the formal construction, the workers should first use the horizontal pipe to measure whether the ink line of the wall elastic is horizontal, and only to ensure the true level of the base line will not make the ceiling installed later inclined or there is a height difference.
2. The ceiling needs to be fixed on a firm wooden keel frame, so the careful selection of the keel material has become an indispensable step, and it is recommended that you try to choose the pine material with good nail holding force.
3. Because the keel is wooden, it is necessary to pay attention to fire prevention, and the standard practice is to paint the surface of the keel evenly, and then nail it to the wall when the whole keel is white, which can ensure that the place where it is in contact with the wall is also brushed.
4. After the surface of the keel is fireproofed, it can be combined, and the workers will use it at the junction of the two keels to fix it at an oblique 45 degrees. At this time, it is necessary to control the strength to prevent cracks in the keel.
5. After nailing the keel frame, the frame needs to be fixed on the wall, and then it is necessary to carefully check whether the spacing between the frames is not more than 300mm in order to have sufficient fastness (it should also be considered according to the distance of the on-site installation of lights and spotlights, otherwise there will be some small troubles in the installation). Otherwise, it is easy to sink and break.
6. Next, you will officially put on the gypsum board.
It is best to let workers use drywall nails to fix the gypsum board, so that the nails will not rust, and the beauty of the gypsum board can be guaranteed for a long time in the future.
7. The nail hole on the gypsum board usually uses anti-rust nail hole putty.
Processing, its practical cement filling nail hole is a more cost-effective and labor-saving method. And the effect after treatment is not worse than nail hole putty at all.
High-strength calcium silicate board m length 8 galvanized boom, 16 * 22 "T" type aluminum alloy secondary keel, 16 * 28 "T" type aluminum alloy main keel, 12 * 18 "L" shaped aluminum alloy side keel.
Hello, the quality is different, the price varies greatly. There are many domestic manufacturers of gypsum board, it is recommended that you find a few more samples to compare, see the quality difference, and the one that suits you is the best. At the same time, for different places, the economic level is different, and the labor force is even more different. >>>More
45 square meters, contracted labor and materials.
Each square plate, 38 light steel main bone with one meter, according to the meter of the gap calculation, T-shaped paint keel per square meter with branches, auxiliary bones with branches.
The gypsum board ceiling only includes a labor cost of about 25 yuan a square, how can the gypsum board be 600X600? You understand it very well.