-
Anonymous users2024-01-24No, the base material of the paint door is a wood-based panel, and the surface is baked at a high temperature by eight spray baking imported paint (three bottoms, three sides, two lights) to form a process, that is, the paint is heated and dried in the drying room after the paint is sprayed. When the paint surface and the substrate are already formed as a whole, it cannot be synthesized outside in the later stage, and the solid wood is not suitable for the process of baking paint and adding surface. But solid wood can be painted, and the painting process:
1. Detect whether the wooden door is made to meet the requirements, and the moisture content should be coordinated with the local climate 2, remove burrs and other debris with sandpaper 3, paint with a closed primer 4, further remove the burrs after drying 5, use putty such as putty to scrape and polish, generally need two to three layers (open can avoid this step) 6, paint white primer 2-3 times (open painting can be done once) 7, further polishing, use putty to repair defective parts 8, paint top coat two to 3 times, Before the last pass, it needs to go through the last polishing 9, survive, and if necessary, the polishing process can also be carried out.
No, the test report is the test report, and the environmental protection certificate is the environmental protection certification. These are two things. Generally speaking, it is sufficient to provide environmental certification certificates to the purchaser for equipment.
Advantages of MDF:
One. The material is relatively fine, and the edge of the cutting surface will be sealed well, so that it is not easy to open the glue. >>>More
Hexiang wood is more environmentally friendly to make cabinets.
Each is good in its own way.
The ecological board is actually a three-layer board, the upper and lower sides are facing layers, the middle layer is filled with fir or Malacca wood, and then the three layers of boards are bonded together with special glue, and finally polished to form a kind of board. The particle board is basically made of sawdust and glue pressing, without too much solid wood, and the environmental protection between the two is believed to be clear to everyone. Another point, I don't know if you have found it, the wardrobe made of particle board has a big smell, which is the smell of pressed glue inside, which is not very good for the human body. >>>More
The main differences are, different substrates, different advantages and disadvantages, and different main uses, as follows: >>>More