Why should you look at the moisture content when buying solid wood flooring?

The moisture content is the most important indicator of whether the solid wood floor is not deformed, and it is not as low as possible to buy the solid wood floor, which can be measured with a tester on the spot at the request of the customer.

The moisture content is an important indicator of whether the solid wood floor is deformed or not. According to the national regulations, the moisture content of 8 12 is qualified, and it should be higher in the south and lower in the north. In fact, it is more accurate to say that there should be different standards in each place, and the average water content of 11 12 is appropriate.

If the water content is too high, the wooden floor will gradually shrink and crack after the laying is completed; Too low a moisture content can cause the wood floor to absorb moisture from the air, causing swelling and warping. Therefore, the moisture content of the purchased wood flooring must be consistent with the local average.

When purchasing, be sure to open the box and use a moisture content tester to detect the moisture content of the purchased varieties of wood flooring.

The moisture content is a crucial factor that affects whether the solid wood floor is deformed after laying. In general, the moisture content of hardwood flooring should be consistent with the local equilibrium moisture content. If the moisture content is too high or too low, the floor will have different degrees of dimensional changes when the ambient humidity changes.

China's territory is vast, the temperature and humidity in different regions vary greatly, especially in the southern region, the humidity is large, rainy, the moisture content of the solid wood floor is high, if in the northern region, the season is dry, more wind and less rain, the moisture content of the solid wood floor is low. The criss-cross structure of the three-layer parquet makes the product more stable, and performs well in the impact resistance, surface wear resistance and other indicators, coupled with multiple special pre-treatments, so that the moisture content of the wood reaches the ideal state, in addition, after insecticide, sterilization, flame retardant and other functional treatments, it can easily cope with up to 30 years of household and even business places, and is not easy to age and deform.