-
Anonymous users2024-01-24Detailed steps to install secondary ceilings:
1. Make the whole keel;
2. Install a layer of gypsum board above;
3. Install the gypsum board around the upper layer;
4. Install a layer of gypsum board below;
5. Install the small vertical plate on the side of the light trough.
Note: The lower layer of gypsum board should press the small vertical board on the side of the lamp trough and the gypsum board around the upper layer, and the gypsum board around the upper layer should press the upper layer of flat gypsum board.
-
Anonymous users2024-01-23Usually, the construction should be carried out according to the node diagram of the drawing.
It is necessary to consider the arrangement of lamps and lanterns before the division of the keel can be considered.
The key is to arrange the keel for reference.
First confirm the size of the secondary beam frame (this can provide the size of the decoration hall to the secondary beam manufacturer, they will calculate it for you), and then wait for the secondary beam to come back, first draw the ink line on the top, hit the top explosion at the corresponding position, pull the pull rod, and then assemble the secondary top underground, several people lift the secondary beam to the top on the edge of the secondary top frame, fix the screws, and finally put the main bone, keel, and board loading. Done-- >>>More
If you want to buy gypsum board, it is best to choose gypsum board with natural gypsum as raw material, followed by desulfurization gypsum, and finally phosphogypsum. >>>More
Generally speaking, for the general living room, the standard width of a straight ceiling is 40cm. >>>More
What is a secondary ceiling? What is a secondary ceiling? The secondary ceiling is a new product of the ceiling category based on the decoration of the top space of home life with the increasing demand of consumers for home decoration with the increasing demand for home decoration ceiling, extending from the traditional ceiling to the living room ceiling, bedroom ceiling, dining room ceiling, study ceiling, balcony ceiling, etc., in the market, it is also usually called the whole house ceiling, split-level ceiling, home ceiling, 3D ceiling, etc. >>>More
The craftsmanship of the installation master is required, and the general interface is used to close the edge, and the glass glue can be used.