Can the bathroom not be waterproofed?

First, the house has been waterproofed, and you should also do a closed water test when you collect the house, don't you understand it?

Second, if there is a change, may damage the original waterproof layer, must be redone waterproof, and because the developer does not make the waterproof quality can not be too good, it is also recommended to make another layer of waterproof bricks!

First, when you built the house, you have applied waterproof paint, but have you changed the water and electricity in your bathroom? Destroy the waterproof, second, before the magnetic tile is not on the waterproof paint is OK, but to do a 24-hour test of the ground animal water to see if there is a leakage downstairs, do more waterproof and one more insurance, in case of water leakage is very troublesome.

If you don't have to do a closed water test, your father will agree to this, and if there is water seepage, you will do waterproofing, and if you don't, you won't do it. One simple thing.

Note: On the wall of the living room, if there is a ditch and buried pipe, then this part must be waterproofed.

In fact, waterproofing doesn't cost much, and making another layer is the choice of most people. Let's make it clear to him what is at stake.

When building a house, there is no waterproof paint on this is not certain, some have it, some have not, but it is absolutely feasible to not use the waterproof paint before pasting the magnetic tile, even if it has been on it before, it can also be used again, at most it costs a little more money. Hope you can handle it. Don't spoil your relationship with your dad.

Family affection is more important than the house, hehe.

If it is a commercial house, the Beijing area is waterproof, but once you change the water and electricity, the waterproof layer will be damaged, so the general need for secondary waterproofing, and the tile is not waterproof, I hope to pay attention to it, because the leakage caused losses downstairs, upstairs basically to accompany the whole accompaniment, hehe.

Dizzy, there is water in the bathroom every day! If you don't use the waterproof coating, you will regret it, and you still have to rework

Why is your dad? Assert your authority? In the future, the water leaks downstairs and you will not be finished!

The waterproof coating of the rough house is very poor, and it is likely to leak!

Therefore, before decoration, you must apply a layer of waterproof coating film by yourself, this practice is the most convenient, the shower room is 1 meter 8 high, and the other parts are 300mm high above the ground.

Tile alone can't prevent infiltration!

The ground is definitely going to be waterproof, even if you have been on it before, there is damage during construction!

Developers generally use waterproof coatings, but the waterproof coatings used for civil construction and decoration are different, and their brushing methods are also different.

Civil engineering is only in the bathroom, kitchen floor to do a layer of waterproofing, and decoration in the wall part of the waterproof.

1.When building a house, it is generally waterproof, and you can do your own water avoidance experiment, and you will know.

2.There is no relationship between tiles and waterproof coatings, you can directly paste tiles, and waterproof coatings only prevent water seepage.

There are two types of toilet waterproofing in buildings: one is structural waterproofing and the other is detailed waterproofing.

The so-called structural waterproofing is commonly the groove of the bathroom, and when pouring the concrete floor, the root of the bathroom wall is directly poured with concrete that is not less than a few centimeters above the ground.

The common detail waterproofing is what you call waterproof coatings and waterproof membranes.

So you can directly see the groove can not do the detail waterproofing, if there is no bathroom groove, then the detail waterproofing is very necessary, by the way, the so-called waterproof coating machine membrane is directly seen with the naked eye when the blank room.

If you want to apply waterproof paint, remember to sprinkle a small amount of fine sand when the paint is not dry, so that the cement slurry can be better bonded with the wall, so that the wall tiles can be firmly pasted.

Red apple flexible JS composite waterproof coating.

Flexible JS composite waterproof coating is an environmentally friendly polymer waterproof coating scientifically formulated with polymer emulsion and inorganic powder, and the waterproof layer formed not only has good flexibility of organic materials, but also has excellent durability of inorganic materials, and is a waterproof product promoted by the Ministry of Construction. Performance characteristics 1. Flexible, can cover cracks not more than 2mm; 2. Direct construction can be carried out in wet areas; 3. It can be used outdoors and has good weather resistance; 4. It is especially suitable for the corners of walls and pipes that are prone to water seepage; 5. Non-toxic and harmless. Scope of application Substrates composed of concrete, brick masonry, pre-casting, and lightweight bricks; Walls, floors, roofs, toilets, bathrooms, shower rooms, kitchens, pools, basements, garages, planters, floor walls, floors, pipe nozzles, yin and yang corners, etc.

Different ideas and different views.