-
Haha, the door was removed, just kidding, it's just that the refrigerator tilts badly.
-
There is no way around this, only violent demolition, I didn't think about it when I bought it when I was hungry, and if it is square, there are 64 in the narrowest place, which is impossible.
-
I really couldn't move out and dismantled the refrigerator door.
110cm= 239cm=
Square meters are approximately equal to square meters. >>>More
Theoretically, you can, but in practice, you might just have to push forward, because you can't lift the height.
1.This flue is small, and the specific size can be determined according to the range hood pipe you purchased, and the general aperture is between 120-180mm! >>>More
It is not important to reserve space up and down the refrigerator, the normal refrigerator is placed in the landlord, and the distance of 50 cm at the top is enough, and the normal room is not so high. The left and right space of the refrigerator is more important, the left and right sides are heat dissipation nets, if you want to put it against the wall, at least 10 cm away from the wall, one is to ensure the distance of normal air circulation, and the other is to ensure that the refrigerator door can be opened normally, not affected by the wall. The back of the refrigerator is insulated, and there is no special requirement to reserve a distance, but in order to ensure ventilation on the left and right sides, it is also necessary to be 10 cm away from the wall.
As long as you can accommodate the door leaf to make several doors, you can make 1 door. If there is one fan as a whole, two expansion grooves can be used to prevent deformation. The production of the sliding door is very simple, as long as the upper and lower rails (now the upper and lower rails are only on the track) + the door leaf is connected with hardware. >>>More