How to press the curtains on the balcony pvc top corner

Updated on Balcony 2024-07-31
1 answers
  1. Anonymous users2024-01-24

    1. After buying a new curtain, it should be fully soaked and washed in clean water first, which can reduce the formaldehyde content remaining on the fabric. After washing, it is best to put the curtain cloth in an outdoor ventilated place to dry, and then use it.

    Second, curtains with peculiar smell do not necessarily contain formaldehyde, mainly chemical fiber curtains, especially those curtains that are thickened or coated in order to shade and prevent ultraviolet rays, etc., and the peculiar smell is particularly obvious. In fact, formaldehyde has no odor, and there are two situations when the smell can be clearly smelled, one is the smell of chemical fiber or shading coating, and the other is that there is both odor and formaldehyde. If the curtain only has formaldehyde, it is generally difficult for us to feel the smell of the curtain, because the formaldehyde release in the curtain is not very high, and it is difficult for inexperienced people to feel the stimulation of formaldehyde.

    3. How to remove the odor of curtains:

    1. Cleaning: Cleaning with water can dissolve part of the free formaldehyde in the curtain into water, so as to remove this part of formaldehyde. Therefore, it is better to clean the newly bought curtains.

    2. Use professional formaldehyde removal products;

    Fourth, the curtain odor removal precautions:

    1. If it is a double-layer cloth blackout curtain, be sure to treat the blackout cloth that has been coated on both sides, that is, it must be treated to the inner side of the blackout cloth that cannot be seen. Both sides of the blackout cloth must be treated, otherwise the effect is not ideal;

    2. Unlike formaldehyde removal, the effect of deodorization takes time. Formaldehyde removal is often immediate, and the effect is in place after two or three hours; It takes two or three days to feel the effect of removing odors, and it usually takes a week to 10 days to remove odors.

Related questions
4 answers2024-07-31

To install the yin angle line, you need to draw the horizontal line of the yin angle line on the wall to be installed, and it should be noted that this horizontal line is measured from the floor of the house, and the horizontal line cannot be measured downward from the position of the ceiling. After that, we have to drill holes in the wall along the upper part of the horizontal line that we have just drawn, about every half a meter, and then we will stuff wooden wedges into the holes. >>>More

1 answers2024-07-31

The yin corners are attached to the wooden keel and the wall, and then fixed to the wooden keel with screws or nails. It should be a question of how to install the last ceiling panel, right?

1 answers2024-07-31

The shed line is mostly gypsum line. It can be cut into small pieces and spliced on. In the future, scraping plaster will not be visible. >>>More

3 answers2024-07-31

If you have a bevel saw, you can adjust the angle, if you don't have it, you can use the saw blade, the angle is not easy to master, you can use the angle ruler as a backer, and repair it with sandpaper after sawing.

1 answers2024-07-31

Gypsum negative angle line installation method.

Installation process of the adhesive wire method: >>>More