The ceiling was finally replaced, I changed the Grad ceiling, and the previous ceiling gusset was no

The ceiling designer of Gele Electric Company pointed out that the gusset is a new type of decorative material that has appeared in recent years, which has the characteristics of lightweight, water-resistant, non-vacuuming, corrosion-resistant, easy to scrub, easy to install, strong three-dimensional sense, soft color and beautiful and generous, and is well received by users. Gussets are particularly suitable for ceiling decoration in kitchens and bathrooms.

But the gusset plate and the frame that matches it are formed by metal sheet or plastic pressing processing, and the connection form of gusset plate is inlay type, in order to ensure that its connection is smooth and not loose, the size of its connection structure should be relatively accurate, and the allowable adjustment range is smaller, and the installation requirements are higher. If the installation of the flat-top frame is uneven or the frame and gusset are deformed, hard insertion during the installation will cause the flattening of the roof to be uneven. In order to avoid the unevenness of the buckle leveling top, the following points should be paid attention to in the process of decoration construction:

l) The purchased gusset and its supporting structure and accessories shall meet the product quality requirements and shall not be bent and deformed. (2) In the process of transportation and stacking, the gusset plate should be set flat and not pressed, and avoid the erosion of high temperature and harmful substances. (3) The frame is installed smoothly, and the spacing deviation should be controlled within the allowable range.

4) When installing the gusset, if there is a deviation in the size, it should be adjusted first and then inserted in order, and should not be inserted hard to prevent deformation. (5) Large lamps, exhaust fans and other objects should be set up with another spreader, and should not be directly placed on the buckle flat top. As long as you can pay attention to the above five points, you can basically achieve the decorative effect of the flat top of the gusset and avoid unevenness.

In the construction process, if necessary, it can be observed and inspected by means of ruler and hand test.

Do not use the peritoneal because it is bright reflective