How to tell if a toilet is good or bad?

1. The surface of a good quality toilet is smooth, and the glaze and the feel of the body are relatively delicate, while the glaze and body of the toilet bowl of poor quality are rough and the color is dull.

2. The temperature of the toilet with excellent quality is higher when firing, and it can achieve the situation of full porcelain, and it feels heavy in the hand, while the toilet with inferior quality is lighter. A good quality toilet bowl has a smooth interior, and a poor quality toilet bowl is the opposite.

1. Gently touch the surface of the toilet bowl with your hands, if there is no uneven feeling, and feel that the glaze and the feel of the body are very delicate, which indicates that the quality of the toilet is better. If it is a low-grade toilet, the glaze and blank on its surface will be rough, the color will be dull, and small holes will be found under the illumination of the light.

2. Because of the high temperature of the high-end toilet during firing, it meets the requirements of all-porcelain, so it will feel heavy in the hand. The firing temperature of the low-end toilet is low and the time is short, so it does not meet the requirements of all-porcelain.

3. The water absorption rate of the toilet bowl fired at high temperature is very low, so it is not easy to suck in sewage and produce peculiar smell. However, some low-end toilets have a high water absorption rate, and when they are sucked into sewage, they are easy to emit unpleasant odors and are difficult to clean. Over time, cracks and water leaks will occur.

When choosing, you can gently tap the toilet bowl with your hands, if the knocking sound is hoarse, not crisp and loud, then such a toilet is likely to have internal cracks, or the product is not cooked.

4. When choosing, you should also reach into the dirt of the toilet with your hand and touch whether the inside is smooth. If it feels rough to the touch, it means that there is no glaze inside, and such a toilet is prone to water leakage. The sealing gasket of the toilet should be made of rubber or foamed plastic, which has strong elasticity and good sealing performance.

5. Whether the design of the pipeline is scientific and reasonable has a great impact on the flushing effect of the toilet. In general, you should test flushing the toilet before buying it. In the formal standard, in the case of less than or equal to six liters of water, the toilet bowl should be able to flush out at least five water-filled ping-pong balls on average for three flushes.

It's not for sure, it depends on what you want.

Do you want to be atmospheric, small and fresh, or do you want to be super practical.

Anyway, I bought a water-saving toilet, pragmatist, hehe.