Why does my toilet always not flush clean?

The glaze on the toilet bowl is not good, try it with Mighty Man.

That's the quality of the toilet. It is that the porcelain light on the surface is not very well done and not smooth enough. There will be such a problem, it should be near those parts every time, and the water in the tank may not be enough or the momentum may not be enough.

Buy a toilet for the exclusive use of the toilet.

Sold in supermarkets. A small piece of it.

Put it in the toilet tank.

When flushing.

What comes out is blue water.

The glaze is not good.

Use toilet cleaner.

Generally, this situation is caused by the glaze is not smooth, whether you have used pickling before, resulting in a honeycomb structure of the glaze. Also, it may be better to flush water before each bowel movement. If you change the toilet, it is recommended to choose the kind that returns the water, that is, you can see that the toilet is inclined flat to the innermost, from the top you can only see a little local outlet in the deepest part of the inside, and you can hardly see the water outside, the suction is very strong and only a little water can be seen, very clean.

View the original post. The glaze is not good, it is recommended to change it, when buying.

Ask clearly |Either use a good quality scrub or get a new toilet|||It may be that the flow rate of the water when the toilet is flushed is too small or the amount of water is not enoughIf the toilet can be used, use it first, waste resources and pollute the environment. I recommend washing the toilet bowl with water first, using vinegar on the surface foam when the toilet is about to dry, and washing it with laundry detergent after five minutes. That's it.

||Toilets are usually not so bad that they can't be flushed, unless you don't clean them regularly. In fact, the use of toilets should be cleaned frequently, especially if the stool is sticky (people with bad stomach), it should be rinsed immediately after use, otherwise it will be difficult to deal with after drying.

The best way is to change the toilet, I use toto at home, buy the cheap kind, very good, water-saving and clean, never cheap. This has to do with the design shape and the glaze material.

View the original post. When choosing a toilet, it is best to touch the inside of the sewage pipe with your hands to see if it is smooth enough, if it is very rough, it is easy to hang dirt, which is easy to cause poor sewage discharge in the future.

View the original post. It is said that you can also clean the toilet bowl by flushing it with a coke. Coke is acidic and gasy!

View the original post. The best way to change the ATMA is to change the toilet, I use TOTO at home, buy the cheap one, very good, save water and clean, never cheap Oh. This has to do with the design shape and the glaze material.

View the original post. When choosing a toilet, it is best to touch the inside of the sewage pipe with your hands to see if it is smooth enough, if it is very rough, it is easy to hang dirt, which is easy to cause poor sewage discharge in the future.

View the original post. It is said that you can also clean the toilet bowl by flushing it with a coke. Coke is acidic and gasy!

View the original post. There is less water.