The TV signal in the living room is brought in from outside, and the signal in the bedroom is drawn

Updated on Living room 2024-07-13
9 answers
  1. Anonymous users2024-01-24

    It may be related to the interface of the TV.,Try changing the TV.。

  2. Anonymous users2024-01-23

    Hehe, there is nothing else, it is the function of the TV itself. It should be that the TV in the living room is an old product, and the bedroom is new.

  3. Anonymous users2024-01-22

    The problem is obvious, and the problem comes from the coaxial cable that separates to the socket that connects to the TV.

    1. If there is a twist in the coaxial line, it will be broken, and the signal will be affected.

    2. Poor contact of the connecting port.

  4. Anonymous users2024-01-21

    1.Swap the living room TV with the living room TV to see if there is a problem with the TV!

    2.The wires in the living room, whether it is a bright line or a dark line, if it is a dark line, it is recommended to draw another bright line to try it! [Make sure that the wire is connected well].

  5. Anonymous users2024-01-20

    There is a problem with the TV,If you ensure that the connector is fine,There is no problem with the new line,That is, the TV is broken,You move the back room to the living room to try,It should be the same as the back room effect,If it is still an effect with the living room TV,You still check the connector,Heart and heart connection,Network and network connection,The two can not touch,Determine whether there is a problem with the line from the connector to the TV。

  6. Anonymous users2024-01-19

    I used to do two years of cable TV maintenance and installation, from the commissioning of the front-end equipment to the user terminal.

    In your case, the reason is that you don't use the splitter, the line becomes a filter with a selected frequency, so some channels are gone, just connect the correct branch splitter.

  7. Anonymous users2024-01-18

    Disassemble the socket panel of the TV in the living room,Check whether the signal cable inside,The mesh shield wire is connected to the coaxial wire。

    Check whether there is a connection or virtual connection in the TV signal distributor.

    Check that the connector connecting the signal cable between the socket and the TV is well connected.

  8. Anonymous users2024-01-17

    Change the signal connector of the TV.

  9. Anonymous users2024-01-16

    The lead should be started from the weak current main box, and the lead should be separated, and a wire should not be led out and then separated.

Related questions
The TV signal at home is sometimes interrupted, so put a wireless land-based device in the living ro
2 answers2024-07-13

Wireless bridging method:

1. Set the SSID, fixed channel, and wireless password of the main router. >>>More

Can the CCTV signal be transmitted wirelessly, there is a CCTV signal in the living room, but I want
3 answers2024-07-13

Cable TV has a wide frequency band. Direct wireless transmission is not possible.

In the new house I bought, there is also a network cable connector in the junction box of the TV sig
2 answers2024-07-13

This network cable is the network cable provided by the cable network's interactive TV. He can realize the broadband Internet access function of the computer by connecting to the cable TV's proprietary network server. Its performance is similar to that of the home fiber optic cable of Unicom Broadband that we generally use. Hope it helps!

Satellite antennas terrestrial TV signal sources are connected to a TV signal cable embedded in the
2 answers2024-07-13

Not feasible, which will at least result in a non-normal viewing all the way.

How to realize that the living room and bedroom watch TV without affecting each other with the same
2 answers2024-07-13

Use two set-top boxes, and from the perspective of cable TV, it is better to use a brancher than a distributor for isolation, and the end should not be empty, preferably with a 75 ohm head.