-
Anonymous users2024-01-24All of them are ground drainage, and the pit spacing is equipped with two specifications of 305mm and 400mm, both of which are side-pressed one-stage flushing methods;
Both of them use jet siphon flushing, both of which are five-level cyclone series, and the momentum is very strong;
The appearance is all conjoined, and the appearance is roughly the same, as shown in the figure below;
The amount of flushing is both, which is very water-saving, but it may still be a little expensive compared to the other two flushes;
The cover plate is made of urea-formaldehyde resin, which is not easy to yellowing and discoloration;
If your toilet tank is only leaking inside and not leaking to the outside, it is because the plug did not reset when you flushed the water last time, you just need to press the flush button again and hear a popping sound in the tank, and the plug will be reset.
This sealing ring will not leak as long as you don't move, and now if the water leaks, you can also seal it with glass glue, if you want to change it, you can buy a whole set of water tank sanitary ware, but it is not necessarily this brand.
Take a look at the previous image.
It may be that there is a small hose on the inlet valve in the water tank and you don't plug it into the overflow pipe head, resulting in too little water in the water seal, you just open the water tank cover and plug the hose in.
They are all a company's products, the internal structure principle is the same, the manufacturer sets so many models in order to adapt to consumers at all levels have room to choose, so when you buy, you only need to choose what you think is beautiful in appearance, and the price is suitable for you.