-
Anonymous users2024-01-24This is very simple, first of all, you must know the style of the water valve in your toilet. There are several kinds, generally there are screwed type, steel sheet fixed, bolt adjusted, etc. Try it, it's the one on the side, and the one in the middle is the water.
-
Anonymous users2024-01-23There is a buoyancy valve in the toilet, and you can adjust that valve up appropriately.
-
Anonymous users2024-01-22The buoyancy valve has long been out of the way.
Replace the toilet bowl with a size flush kit.
If you need the water level to be higher, twist it counterclockwise, if you need the water level to be lower, adjust it clockwise, don't twist it back and forth, be patient, twist it a few times to try, and then twist it a few times and try again, and you will get the water level you need after a few times.
Reasons why the toilet won't drain:
1.Nowadays, a filter will be placed in the toilet tank, and after the filter is used for a long time, it will deteriorate and cause more scale to cause the filter to clog, etc., so it will cause the tap water in the tank to not enter smoothly. >>>More
The main components of the flush toilet tank are: inlet valve, drain valve, water inlet pipe, outlet pipe, float, seepage pipe, water plug, button and lever, etc. It can be divided into two categories: conjoined and split tanks. >>>More
Reserved at meters from the ground, staggered wall corners 300mm, hot and cold water spacing 150mm; Insert the sewer pipe into the sewer pipe, seal the perimeter of the sewer with glass glue, and install it 30 cm above the ground.
It may be that a part is broken, it is recommended to remove it and clean it first, and then install it as it is, and try it. >>>More